残疾版本 只有一路从机3 可以用，但是adc会飘

Software/master/PressureSensorBoardMaster/Core/Src/gpio.c

@@ -50,10 +50,10 @@ void MX_GPIO_Init(void)
   __HAL_RCC_GPIOB_CLK_ENABLE();
 
   /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6, GPIO_PIN_SET);
+  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7, GPIO_PIN_SET);
 
-  /*Configure GPIO pins : PB3 PB4 PB5 PB6 */
+  /*Configure GPIO pins : PB4 PB5 PB6 PB7 */
-  GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
+  GPIO_InitStruct.Pin = GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;

Software/master/PressureSensorBoardMaster/Core/Src/usart.c

@@ -152,8 +152,8 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
     hdma_usart1_rx.Init.MemInc = DMA_MINC_ENABLE;
     hdma_usart1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
     hdma_usart1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
-    hdma_usart1_rx.Init.Mode = DMA_NORMAL;
+    hdma_usart1_rx.Init.Mode = DMA_CIRCULAR;
-    hdma_usart1_rx.Init.Priority = DMA_PRIORITY_LOW;
+    hdma_usart1_rx.Init.Priority = DMA_PRIORITY_VERY_HIGH;
     if (HAL_DMA_Init(&hdma_usart1_rx) != HAL_OK)
     {
       Error_Handler();

Software/master/PressureSensorBoardMaster/MDK-ARM/EventRecorderStub.scvd

@@ -0,0 +1,9 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<component_viewer schemaVersion="0.1" xmlns:xs="http://www.w3.org/2001/XMLSchema-instance" xs:noNamespaceSchemaLocation="Component_Viewer.xsd">
+
+<component name="EventRecorderStub" version="1.0.0"/>       <!--name and version of the component-->
+  <events>
+  </events>
+
+</component_viewer>

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/ExtDll.iex

@@ -0,0 +1,2 @@
+[EXTDLL]
+Count=0

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/PressureSensorBoardMaster.build_log.htm

@@ -3,68 +3,68 @@
 <pre>
 <h1>µVision Build Log</h1>
 <h2>Tool Versions:</h2>
-IDE-Version: ¦ÌVision V5.43.1.0
+IDE-Version: ¦ÌVision V5.41.0.0
-Copyright (C) 2025 ARM Ltd and ARM Germany GmbH. All rights reserved.
+Copyright (C) 2024 ARM Ltd and ARM Germany GmbH. All rights reserved.
-License Information: 23 23, 2323, LIC=X96CK-Z03Q7-63IMB-2TXM6-GA9NR-VVDXS
+License Information: 123 1543588107@qq.com, 123, LIC=65ISZ-J0KE9-011P1-CAV5H-FN80T-C8A3E
  
 Tool Versions:
-Toolchain:       MDK-ARM Plus  Version: 5.43.0.0
+Toolchain:       MDK-ARM Plus  Version: 5.41.0.0
-Toolchain Path:  C:\keil\ARM\ARMCC\Bin
+Toolchain Path:  C:\app\Keil_v5\ARM\ARMCC\Bin
 C Compiler:      Armcc.exe V5.06 update 7 (build 960)
 Assembler:       Armasm.exe V5.06 update 7 (build 960)
 Linker/Locator:  ArmLink.exe V5.06 update 7 (build 960)
 Library Manager: ArmAr.exe V5.06 update 7 (build 960)
 Hex Converter:   FromElf.exe V5.06 update 7 (build 960)
-CPU DLL:         SARMCM3.DLL V5.43.0.0
+CPU DLL:         SARMCM3.DLL V5.41.0.0
 Dialog DLL:      DCM.DLL V1.17.5.0
-Target DLL:      STLink\ST-LINKIII-KEIL_SWO.dll V3.3.1.0
+Target DLL:      STLink\ST-LINKIII-KEIL_SWO.dll V3.3.0.0
-Dialog DLL:      TCM.DLL V1.56.6.0
+Dialog DLL:      TCM.DLL V1.56.4.0
  
 <h2>Project:</h2>
-C:\Users\kkkjt\Desktop\PressureSensorBoard\Software\master\PressureSensorBoardMaster\MDK-ARM\PressureSensorBoardMaster.uvprojx
+C:\Users\15435\Desktop\PressureSensorBoard\Software\master\PressureSensorBoardMaster\MDK-ARM\PressureSensorBoardMaster.uvprojx
-Project File Date:  11/10/2025
+Project File Date:  11/12/2025
 
 <h2>Output:</h2>
-*** Using Compiler 'V5.06 update 7 (build 960)', folder: 'C:\keil\ARM\ARMCC\Bin'
+*** Using Compiler 'V5.06 update 7 (build 960)', folder: 'C:\app\Keil_v5\ARM\ARMCC\Bin'
 Rebuild target 'PressureSensorBoardMaster'
 assembling startup_stm32f103xb.s...
-compiling tim.c...
+compiling stm32f1xx_hal_rcc_ex.c...
-compiling dma.c...
+compiling stm32f1xx_it.c...
 compiling usart.c...
+compiling dma.c...
+compiling tim.c...
+compiling stm32f1xx_hal_cortex.c...
+compiling stm32f1xx_hal_msp.c...
+compiling stm32f1xx_hal.c...
 compiling main.c...
-../Core/Src/main.c(969): warning:  #1-D: last line of file ends without a newline
+../Core/Src/main.c(429): warning:  #1-D: last line of file ends without a newline
   #endif /* USE_FULL_ASSERT */
 ../Core/Src/main.c: 1 warning, 0 errors
-compiling gpio.c...
-compiling stm32f1xx_hal_msp.c...
-compiling stm32f1xx_it.c...
 compiling stm32f1xx_hal_gpio_ex.c...
-compiling stm32f1xx_hal_tim_ex.c...
+compiling gpio.c...
-compiling stm32f1xx_hal_tim.c...
-compiling stm32f1xx_hal_rcc_ex.c...
-compiling stm32f1xx_hal.c...
 compiling stm32f1xx_hal_gpio.c...
 compiling stm32f1xx_hal_dma.c...
 compiling stm32f1xx_hal_rcc.c...
-compiling stm32f1xx_hal_exti.c...
+compiling stm32f1xx_hal_tim_ex.c...
-compiling stm32f1xx_hal_cortex.c...
+compiling stm32f1xx_hal_tim.c...
-compiling stm32f1xx_hal_flash_ex.c...
 compiling stm32f1xx_hal_pwr.c...
-compiling stm32f1xx_hal_flash.c...
+compiling stm32f1xx_hal_exti.c...
 compiling system_stm32f1xx.c...
+compiling stm32f1xx_hal_flash.c...
+compiling stm32f1xx_hal_flash_ex.c...
 compiling stm32f1xx_hal_uart.c...
 linking...
-Program Size: Code=11080 RO-data=368 RW-data=120 ZI-data=2312  
+Program Size: Code=9100 RO-data=416 RW-data=36 ZI-data=2140  
 FromELF: creating hex file...
 "PressureSensorBoardMaster\PressureSensorBoardMaster.axf" - 0 Error(s), 1 Warning(s).
 
 <h2>Software Packages used:</h2>
 
 Package Vendor: ARM
-                https://www.keil.com/pack/ARM.CMSIS.6.2.0.pack
+                https://www.keil.com/pack/ARM.CMSIS.6.1.0.pack
-                ARM::CMSIS@6.2.0
+                ARM::CMSIS@6.1.0
                 CMSIS (Common Microcontroller Software Interface Standard)
-   * Component: CORE Version: 6.1.1
+   * Component: CORE Version: 6.1.0
 
 Package Vendor: Keil
                 https://www.keil.com/pack/Keil.STM32F1xx_DFP.2.4.1.pack
@@ -73,14 +73,14 @@ Package Vendor: Keil
 
 <h2>Collection of Component include folders:</h2>
   ./RTE/_PressureSensorBoardMaster
-  C:/keil/ARM/CMSIS/6.2.0/CMSIS/Core/Include
+  C:/app/Keil_v5/ARM/Packs/ARM/CMSIS/6.1.0/CMSIS/Core/Include
-  C:/keil/Keil/STM32F1xx_DFP/2.4.1/Device/Include
+  C:/app/Keil_v5/ARM/Packs/Keil/STM32F1xx_DFP/2.4.1/Device/Include
 
 <h2>Collection of Component Files used:</h2>
 
-   * Component: ARM::CMSIS:CORE@6.1.1
+   * Component: ARM::CMSIS:CORE@6.1.0
       Include file:  CMSIS/Core/Include/tz_context.h
-Build Time Elapsed:  00:00:16
+Build Time Elapsed:  00:00:03
 </pre>
 </body>
 </html>

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/dma.d

@@ -8,14 +8,14 @@ pressuresensorboardmaster\dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_h
 pressuresensorboardmaster\dma.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\dma.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\dma.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\dma.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\dma.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\dma.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\dma.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\dma.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\dma.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\dma.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\dma.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/gpio.d

@@ -8,14 +8,14 @@ pressuresensorboardmaster\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_
 pressuresensorboardmaster\gpio.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\gpio.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\gpio.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\gpio.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\gpio.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\gpio.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\gpio.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\gpio.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\gpio.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\gpio.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\gpio.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/main.d

@@ -7,14 +7,14 @@ pressuresensorboardmaster\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_
 pressuresensorboardmaster\main.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\main.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\main.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\main.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\main.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\main.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\main.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\main.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\main.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\main.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\main.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\main.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h
@@ -32,6 +32,5 @@ pressuresensorboardmaster\main.o: ../Core/Inc/dma.h
 pressuresensorboardmaster\main.o: ../Core/Inc/tim.h
 pressuresensorboardmaster\main.o: ../Core/Inc/usart.h
 pressuresensorboardmaster\main.o: ../Core/Inc/gpio.h
-pressuresensorboardmaster\main.o: C:\keil\ARM\ARMCC\Bin\..\include\stdio.h
+pressuresensorboardmaster\main.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdio.h
-pressuresensorboardmaster\main.o: C:\keil\ARM\ARMCC\Bin\..\include\string.h
+pressuresensorboardmaster\main.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\string.h
-pressuresensorboardmaster\main.o: C:\keil\ARM\ARMCC\Bin\..\include\stdlib.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/s
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_cortex.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/STM32F1xx_HAL_Drive
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_cortex.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_cortex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_cortex.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_cortex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_cortex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_dma.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/STM32F1xx_HAL_Driver/I
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_dma.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_dma.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_dma.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_dma.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_dma.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_exti.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/STM32F1xx_HAL_Driver/
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_exti.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_exti.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_exti.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_exti.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_exti.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_flash.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/STM32F1xx_HAL_Driver
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_flash.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_flash.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_flash.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_flash.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_flash.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_flash_ex.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/STM32F1xx_HAL_Dri
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_flash_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_gpio.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/STM32F1xx_HAL_Driver/
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_gpio.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_gpio.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_gpio.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_gpio.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_gpio_ex.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/STM32F1xx_HAL_Driv
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_gpio_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_msp.d

@@ -7,14 +7,14 @@ pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/I
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_msp.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_msp.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_msp.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_msp.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_msp.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_pwr.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/STM32F1xx_HAL_Driver/I
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_pwr.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_pwr.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_pwr.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_pwr.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_pwr.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_rcc.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/STM32F1xx_HAL_Driver/I
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_rcc.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_rcc.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_rcc.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_rcc.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_rcc_ex.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/STM32F1xx_HAL_Drive
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_rcc_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_tim.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/STM32F1xx_HAL_Driver/I
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_tim.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_tim.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_tim.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_tim.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_tim_ex.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/STM32F1xx_HAL_Drive
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_tim_ex.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_hal_uart.d

@@ -6,14 +6,14 @@ pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_hal_uart.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_hal_uart.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_hal_uart.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_hal_uart.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_hal_uart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/stm32f1xx_it.d

@@ -7,14 +7,14 @@ pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/st
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\stm32f1xx_it.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\stm32f1xx_it.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\stm32f1xx_it.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\stm32f1xx_it.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\stm32f1xx_it.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/system_stm32f1xx.d

@@ -2,7 +2,7 @@ pressuresensorboardmaster\system_stm32f1xx.o: ../Core/Src/system_stm32f1xx.c
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\system_stm32f1xx.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\system_stm32f1xx.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
@@ -13,7 +13,7 @@ pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/STM32F1xx_HAL_Driver/In
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_def.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\system_stm32f1xx.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\system_stm32f1xx.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\system_stm32f1xx.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/tim.d

@@ -8,14 +8,14 @@ pressuresensorboardmaster\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_h
 pressuresensorboardmaster\tim.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\tim.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\tim.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\tim.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\tim.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\tim.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\tim.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\tim.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\tim.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\tim.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\tim.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\tim.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/PressureSensorBoardMaster/usart.d

@@ -8,14 +8,14 @@ pressuresensorboardmaster\usart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx
 pressuresensorboardmaster\usart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
 pressuresensorboardmaster\usart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
 pressuresensorboardmaster\usart.o: ../Drivers/CMSIS/Include/core_cm3.h
-pressuresensorboardmaster\usart.o: C:\keil\ARM\ARMCC\Bin\..\include\stdint.h
+pressuresensorboardmaster\usart.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stdint.h
 pressuresensorboardmaster\usart.o: ../Drivers/CMSIS/Include/cmsis_version.h
 pressuresensorboardmaster\usart.o: ../Drivers/CMSIS/Include/cmsis_compiler.h
 pressuresensorboardmaster\usart.o: ../Drivers/CMSIS/Include/cmsis_armcc.h
 pressuresensorboardmaster\usart.o: ../Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
 pressuresensorboardmaster\usart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal.h
 pressuresensorboardmaster\usart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h
-pressuresensorboardmaster\usart.o: C:\keil\ARM\ARMCC\Bin\..\include\stddef.h
+pressuresensorboardmaster\usart.o: C:\app\Keil_v5\ARM\ARMCC\Bin\..\include\stddef.h
 pressuresensorboardmaster\usart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_rcc_ex.h
 pressuresensorboardmaster\usart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio.h
 pressuresensorboardmaster\usart.o: ../Drivers/STM32F1xx_HAL_Driver/Inc/stm32f1xx_hal_gpio_ex.h

Software/master/PressureSensorBoardMaster/MDK-ARM/startup_stm32f103xb.lst

@@ -473,10 +473,11 @@ ARM Macro Assembler    Page 8
               00000000 
 Command Line: --debug --xref --diag_suppress=9931 --cpu=Cortex-M3 --apcs=interw
 ork --depend=pressuresensorboardmaster\startup_stm32f103xb.d -opressuresensorbo
-ardmaster\startup_stm32f103xb.o -I.\RTE\_PressureSensorBoardMaster -IC:\keil\AR
+ardmaster\startup_stm32f103xb.o -I.\RTE\_PressureSensorBoardMaster -IC:\app\Kei
-M\CMSIS\6.2.0\CMSIS\Core\Include -IC:\keil\Keil\STM32F1xx_DFP\2.4.1\Device\Incl
+l_v5\ARM\Packs\ARM\CMSIS\6.1.0\CMSIS\Core\Include -IC:\app\Keil_v5\ARM\Packs\Ke
-ude --predefine="__UVISION_VERSION SETA 543" --predefine="STM32F10X_MD SETA 1" 
+il\STM32F1xx_DFP\2.4.1\Device\Include --predefine="__UVISION_VERSION SETA 541" 
---predefine="_RTE_ SETA 1" --list=startup_stm32f103xb.lst startup_stm32f103xb.s
+--predefine="STM32F10X_MD SETA 1" --predefine="_RTE_ SETA 1" --list=startup_stm
+32f103xb.lst startup_stm32f103xb.s
 
 
 

Software/master/PressureSensorBoardMaster/PressureSensorBoardMaster.ioc

@@ -8,10 +8,10 @@ Dma.USART1_RX.0.Direction=DMA_PERIPH_TO_MEMORY
 Dma.USART1_RX.0.Instance=DMA1_Channel5
 Dma.USART1_RX.0.MemDataAlignment=DMA_MDATAALIGN_BYTE
 Dma.USART1_RX.0.MemInc=DMA_MINC_ENABLE
-Dma.USART1_RX.0.Mode=DMA_NORMAL
+Dma.USART1_RX.0.Mode=DMA_CIRCULAR
 Dma.USART1_RX.0.PeriphDataAlignment=DMA_PDATAALIGN_BYTE
 Dma.USART1_RX.0.PeriphInc=DMA_PINC_DISABLE
-Dma.USART1_RX.0.Priority=DMA_PRIORITY_LOW
+Dma.USART1_RX.0.Priority=DMA_PRIORITY_VERY_HIGH
 Dma.USART1_RX.0.RequestParameters=Instance,Direction,PeriphInc,MemInc,PeriphDataAlignment,MemDataAlignment,Mode,Priority
 File.Version=6
 GPIO.groupedBy=Group By Peripherals
@@ -32,10 +32,10 @@ Mcu.Name=STM32F103C(8-B)Tx
 Mcu.Package=LQFP48
 Mcu.Pin0=PD0-OSC_IN
 Mcu.Pin1=PD1-OSC_OUT
-Mcu.Pin10=PB3
+Mcu.Pin10=PB4
-Mcu.Pin11=PB4
+Mcu.Pin11=PB5
-Mcu.Pin12=PB5
+Mcu.Pin12=PB6
-Mcu.Pin13=PB6
+Mcu.Pin13=PB7
 Mcu.Pin14=VP_SYS_VS_Systick
 Mcu.Pin15=VP_TIM2_VS_ClockSourceINT
 Mcu.Pin16=VP_TIM3_VS_ClockSourceINT
@@ -84,10 +84,6 @@ PB10.Mode=Asynchronous
 PB10.Signal=USART3_TX
 PB11.Mode=Asynchronous
 PB11.Signal=USART3_RX
-PB3.GPIOParameters=PinState
-PB3.Locked=true
-PB3.PinState=GPIO_PIN_SET
-PB3.Signal=GPIO_Output
 PB4.GPIOParameters=PinState
 PB4.Locked=true
 PB4.PinState=GPIO_PIN_SET
@@ -100,6 +96,10 @@ PB6.GPIOParameters=PinState
 PB6.Locked=true
 PB6.PinState=GPIO_PIN_SET
 PB6.Signal=GPIO_Output
+PB7.GPIOParameters=PinState
+PB7.Locked=true
+PB7.PinState=GPIO_PIN_SET
+PB7.Signal=GPIO_Output
 PD0-OSC_IN.Mode=HSE-External-Oscillator
 PD0-OSC_IN.Signal=RCC_OSC_IN
 PD1-OSC_OUT.Mode=HSE-External-Oscillator

Software/slave/PressureSensorBoard-slave/Core/Src/adc.c

@@ -45,7 +45,7 @@ void MX_ADC1_Init(void)
   */
   hadc1.Instance = ADC1;
   hadc1.Init.ScanConvMode = ADC_SCAN_ENABLE;
-  hadc1.Init.ContinuousConvMode = ENABLE;
+  hadc1.Init.ContinuousConvMode = DISABLE;
   hadc1.Init.DiscontinuousConvMode = DISABLE;
   hadc1.Init.ExternalTrigConv = ADC_SOFTWARE_START;
   hadc1.Init.DataAlign = ADC_DATAALIGN_RIGHT;
@@ -59,7 +59,7 @@ void MX_ADC1_Init(void)
   */
   sConfig.Channel = ADC_CHANNEL_0;
   sConfig.Rank = ADC_REGULAR_RANK_1;
-  sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
     Error_Handler();
@@ -87,6 +87,7 @@ void MX_ADC1_Init(void)
   */
   sConfig.Channel = ADC_CHANNEL_3;
   sConfig.Rank = ADC_REGULAR_RANK_4;
+  sConfig.SamplingTime = ADC_SAMPLETIME_7CYCLES_5;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
     Error_Handler();
@@ -96,6 +97,7 @@ void MX_ADC1_Init(void)
   */
   sConfig.Channel = ADC_CHANNEL_4;
   sConfig.Rank = ADC_REGULAR_RANK_5;
+  sConfig.SamplingTime = ADC_SAMPLETIME_239CYCLES_5;
   if (HAL_ADC_ConfigChannel(&hadc1, &sConfig) != HAL_OK)
   {
     Error_Handler();
@@ -149,7 +151,7 @@ void HAL_ADC_MspInit(ADC_HandleTypeDef* adcHandle)
     hdma_adc1.Init.MemInc = DMA_MINC_ENABLE;
     hdma_adc1.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
     hdma_adc1.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
-    hdma_adc1.Init.Mode = DMA_NORMAL;
+    hdma_adc1.Init.Mode = DMA_CIRCULAR;
     hdma_adc1.Init.Priority = DMA_PRIORITY_MEDIUM;
     if (HAL_DMA_Init(&hdma_adc1) != HAL_OK)
     {

Software/slave/PressureSensorBoard-slave/Core/Src/gpio.c

@@ -58,6 +58,9 @@ void MX_GPIO_Init(void)
   /*Configure GPIO pin Output Level */
   HAL_GPIO_WritePin(GPIOB, SW2_Pin|SW3_Pin|SW4_Pin|SW5_Pin, GPIO_PIN_RESET);
 
+  /*Configure GPIO pin Output Level */
+  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8|GPIO_PIN_9, GPIO_PIN_SET);
+
   /*Configure GPIO pins : PC13 PC14 PC15 */
   GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15;
   GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
@@ -71,11 +74,9 @@ void MX_GPIO_Init(void)
   HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
   /*Configure GPIO pins : PB0 PB1 PB2 PB10
-                           PB11 PB14 PB15 PB7
+                           PB11 PB14 PB15 PB7 */
-                           PB8 PB9 */
   GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_10
-                          |GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_7
+                          |GPIO_PIN_11|GPIO_PIN_14|GPIO_PIN_15|GPIO_PIN_7;
-                          |GPIO_PIN_8|GPIO_PIN_9;
   GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
   HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
@@ -99,12 +100,12 @@ void MX_GPIO_Init(void)
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
   HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
-  /*Configure GPIO pin : SW5_Pin */
+  /*Configure GPIO pins : SW5_Pin PB8 PB9 */
-  GPIO_InitStruct.Pin = SW5_Pin;
+  GPIO_InitStruct.Pin = SW5_Pin|GPIO_PIN_8|GPIO_PIN_9;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(SW5_GPIO_Port, &GPIO_InitStruct);
+  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
 
 }
 

Software/slave/PressureSensorBoard-slave/Core/Src/main.c

@@ -4,6 +4,16 @@
   * @file           : main.c
   * @brief          : Main program body
   ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
   */
 /* USER CODE END Header */
 /* Includes ------------------------------------------------------------------*/
@@ -29,6 +39,7 @@ typedef enum {
     ROW_PB6
 } MatrixRow_t;
 
+
 // Modbus协议定义
 typedef enum {
     CMD_READ_STATUS = 0x01,    // 读取状态
@@ -49,6 +60,7 @@ typedef enum {
 #define ADC_BUFFER_SIZE ADC_CHANNELS
 #define MATRIX_ROWS 5
 #define MATRIX_COLS 6
+#define ROW_SCAN_TIME 100  // 每行扫描时间10ms
 #define THRESHOLD_LOW 100
 #define THRESHOLD_HIGH 300
 
@@ -58,6 +70,7 @@ typedef enum {
 #define STATUS_FRAME_SIZE 5
 #define MATRIX_FRAME_SIZE 10
 
+
 /* USER CODE END PD */
 
 /* Private macro -------------------------------------------------------------*/
@@ -70,18 +83,20 @@ typedef enum {
 /* USER CODE BEGIN PV */
 uint32_t adc_buffer[ADC_BUFFER_SIZE] = {0};
 uint32_t matrix_data[MATRIX_ROWS][MATRIX_COLS] = {0};
-uint8_t matrix_bitmap[MATRIX_ROWS][MATRIX_COLS] = {0};
 volatile uint8_t adc_data_ready = 0;
+
 MatrixRow_t current_row = ROW_PA15;
 uint8_t matrix_scan_complete = 0;
+uint32_t row_start_time = 0;
+uint8_t matrix_bitmap[MATRIX_ROWS];
 
-// 新增变量
 uint8_t device_address = 0x01;
 uint8_t device_state = STATE_INIT;
 uint8_t uart_rx_buffer[RX_BUFFER_SIZE];
 uint8_t uart_tx_buffer[TX_BUFFER_SIZE];
 volatile uint8_t uart_rx_complete = 0;
 uint8_t rx_data_length = 0;
+
 /* USER CODE END PV */
 
 /* Private function prototypes -----------------------------------------------*/
@@ -89,8 +104,6 @@ void SystemClock_Config(void);
 /* USER CODE BEGIN PFP */
 void ADC_Start_Conversion(void);
 void Matrix_Select_Row(MatrixRow_t row);
-void Matrix_Scan_Next_Row(void);
-void Matrix_Process_Data(void);
 void Matrix_Reset_All_Rows(void);
 
 // 新增函数
@@ -102,6 +115,7 @@ void Process_Modbus_Command(void);
 void Send_Status_Response(uint8_t status);
 void Send_Matrix_Response(void);
 void Device_Initialization(void);
+
 /* USER CODE END PFP */
 
 /* Private user code ---------------------------------------------------------*/
@@ -157,22 +171,6 @@ void Device_Initialization(void)
     }
 }
 
-/**
-  * @brief 压缩单行数据为8位
-  */
-uint8_t Matrix_Compress_Row(int row)
-{
-    uint8_t compressed = 0;
-    for(int col = 0; col < MATRIX_COLS; col++)
-    {
-        if(matrix_bitmap[row][col] == 1)
-        {
-            compressed |= (1 << col);
-        }
-    }
-    return compressed;
-}
-
 /**
   * @brief 计算Modbus CRC16校验
   */
@@ -197,18 +195,6 @@ uint16_t Calculate_CRC16(uint8_t *data, uint8_t length)
     return crc;
 }
 
-/**
-  * @brief 验证CRC16校验
-  */
-uint8_t Verify_CRC16(uint8_t *data, uint8_t length)
-{
-    if(length < 2) return 0;
-    
-    uint16_t received_crc = (data[length-1] << 8) | data[length-2];
-    uint16_t calculated_crc = Calculate_CRC16(data, length-2);
-    
-    return (received_crc == calculated_crc);
-}
 
 /**
   * @brief 处理Modbus命令
@@ -218,10 +204,10 @@ void Process_Modbus_Command(void)
     if(rx_data_length < 4) return;  // 最小命令长度
     
     // 验证CRC
-    if(!Verify_CRC16(uart_rx_buffer, rx_data_length))
+//    if(!Verify_CRC16(uart_rx_buffer, rx_data_length))
-    {
+//    {
-        return;  // CRC校验失败
+ //       return;  // CRC校验失败
-    }
+//    }
     
     // 检查设备地址
     if(uart_rx_buffer[0] != device_address && uart_rx_buffer[0] != 0xFF)
@@ -236,6 +222,8 @@ void Process_Modbus_Command(void)
         case CMD_READ_STATUS:
             // 状态询问命令
             Send_Status_Response(device_state == STATE_READY ? 0x01 : 0x00);
+				    HAL_GPIO_WritePin(GPIOB, GPIO_PIN_8, GPIO_PIN_RESET);
+
             break;
             
         case CMD_READ_MATRIX:
@@ -243,6 +231,8 @@ void Process_Modbus_Command(void)
             if(device_state == STATE_READY || device_state == STATE_WORKING)
             {
                 Send_Matrix_Response();
+							  HAL_GPIO_WritePin(GPIOB, GPIO_PIN_9, GPIO_PIN_RESET);
+
             }
             break;
             
@@ -324,8 +314,10 @@ void ADC_Start_Conversion(void)
   */
 void Matrix_Select_Row(MatrixRow_t row)
 {
+    // 首先关闭所有行
     Matrix_Reset_All_Rows();
     
+    // 打开选定的行
     switch(row)
     {
         case ROW_PA15:
@@ -344,6 +336,9 @@ void Matrix_Select_Row(MatrixRow_t row)
             HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_SET);
             break;
     }
+    
+    // 记录行切换时间
+    row_start_time = HAL_GetTick();
 }
 
 /**
@@ -359,40 +354,24 @@ void Matrix_Reset_All_Rows(void)
 }
 
 /**
-  * @brief 扫描下一行矩阵
+  * @brief 压缩单行矩阵数据到位图
+  * @param row 行号
+  * @return 压缩后的位图字节
   */
-void Matrix_Scan_Next_Row(void)
+uint8_t Matrix_Compress_Row(int row)
 {
-    if(device_state != STATE_WORKING) return;
+    uint8_t row_byte = 0;
     
-    Matrix_Select_Row(current_row);
+    for (int col = 0; col < MATRIX_COLS; col++)
-    HAL_Delay(2);
-    ADC_Start_Conversion();
-}
-
-/**
-  * @brief 处理矩阵数据并生成位图
-  */
-void Matrix_Process_Data(void)
-{
-    for (int row = 0; row < MATRIX_ROWS; row++)
     {
-        for (int col = 0; col < MATRIX_COLS; col++)
+        if(matrix_data[row][col] < 100)
         {
-            if (matrix_data[row][col] < THRESHOLD_LOW)
+            row_byte |= (1 << col);  // 第col位设为1
-            {
-                matrix_bitmap[row][col] = 1;
-            }
-            else if (matrix_data[row][col] > THRESHOLD_HIGH)
-            {
-                matrix_bitmap[row][col] = 0;
-            }
-            else
-            {
-                matrix_bitmap[row][col] = 0;
-            }
         }
+        // 注意：高于300的情况会自动保持0（默认值）
     }
+    
+    return row_byte;
 }
 
 /**
@@ -400,25 +379,22 @@ void Matrix_Process_Data(void)
   */
 void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
 {
-    if(device_state != STATE_WORKING) return;
+    // 保存当前行的数据
-    
     for (int col = 0; col < MATRIX_COLS; col++)
     {
         matrix_data[current_row][col] = adc_buffer[col];
     }
+    
     adc_data_ready = 1;
 }
 
 /**
-  * @brief 串口接收完成回调函数
+  * @brief ADC错误回调函数
   */
-void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
 {
-    uart_rx_complete = 1;
+    char error_msg[] = "ADC Error Occurred!\r\n";
-    rx_data_length = 4;
+    HAL_UART_Transmit(&huart1, (uint8_t*)error_msg, strlen(error_msg), HAL_MAX_DELAY);
-    
-    // 重新启动接收
-    HAL_UART_Receive_DMA(&huart1, uart_rx_buffer, 4);
 }
 
 /* USER CODE END 0 */
@@ -456,7 +432,7 @@ int main(void)
   MX_ADC1_Init();
   MX_USART1_UART_Init();
   /* USER CODE BEGIN 2 */
-    // 初始化设备地址
+	    // 初始化设备地址
     Device_Address_Init();
     
     // 执行设备初始化
@@ -465,23 +441,106 @@ int main(void)
     // 启动串口DMA接收
     HAL_UART_Receive_DMA(&huart1, uart_rx_buffer, RX_BUFFER_SIZE);
 	
-    // 如果初始化成功，进入准备就绪状态
+    // ADC校准
+    if (HAL_ADCEx_Calibration_Start(&hadc1) != HAL_OK)
+    {
+        Error_Handler();
+    }
+    
+    // 初始化所有行为低电平
+    Matrix_Reset_All_Rows();
+    
+		
+		    // 如果初始化成功，进入准备就绪状态
     if(device_state == STATE_READY)
     {
-        // 可以开始矩阵扫描
+       // 选择第一行并启动ADC转换
-        device_state = STATE_WORKING;
+       Matrix_Select_Row(current_row);
-        Matrix_Scan_Next_Row();
+       ADC_Start_Conversion();
     }
+    // 选择第一行并启动ADC转换
+//    Matrix_Select_Row(current_row);
+//    ADC_Start_Conversion();
+    
+    // 发送启动信息
+//    char startup_msg[] = "5x6 Matrix ADC Scanner Started - Direct ADC Output\r\n";
+//    HAL_UART_Transmit(&huart1, (uint8_t*)startup_msg, strlen(startup_msg), HAL_MAX_DELAY);
   /* USER CODE END 2 */
 
   /* Infinite loop */
   /* USER CODE BEGIN WHILE */
-  while (1)
+    while (1)
-  {
+    {
+        // 检查是否到达行切换时间
+/*        if (HAL_GetTick() - row_start_time >= ROW_SCAN_TIME)
+        {
+            // 移动到下一行
+            current_row++;
+            if(current_row >= MATRIX_ROWS)
+            {
+                // 完成一次完整扫描
+                current_row = ROW_PA15;
+                matrix_scan_complete = 1;
+            }
+            
+            // 选择新的一行
+            Matrix_Select_Row(current_row);
+            
+            if(matrix_scan_complete)
+            {
+                // 发送ADC原始值
+                UART_Send_ADC_Values();
+                matrix_scan_complete = 0;
+            }
+            
+            // 重新启动ADC转换
+            ADC_Start_Conversion();
+        }
+        
+        // 其他任务可以在这里处理
+        HAL_Delay(10); // 小的延时以减少CPU负载
+*/
+      // 检查设备状态
+    if(device_state == STATE_READY || device_state == STATE_WORKING)
+    {
+        // 检查是否到达行切换时间
+        if (HAL_GetTick() - row_start_time >= ROW_SCAN_TIME)
+        {
+            // 移动到下一行
+            current_row++;
+            if(current_row >= MATRIX_ROWS)
+            {
+                // 完成一次完整扫描
+                current_row = ROW_PA15;
+                matrix_scan_complete = 1;
+                device_state = STATE_WORKING; // 进入工作状态
+            }
+            
+            // 选择新的一行
+            Matrix_Select_Row(current_row);
+            
+            // 重新启动ADC转换
+            ADC_Start_Conversion();
+        }
+    }
+
+        // 处理Modbus命令（无论设备状态如何都处理）
+    if(uart_rx_complete)
+    {
+        Process_Modbus_Command();
+        uart_rx_complete = 0;
+        
+        // 重新启动DMA接收
+        HAL_UART_Receive_DMA(&huart1, uart_rx_buffer, RX_BUFFER_SIZE);
+    }
+    
+    // 其他任务可以在这里处理
+    HAL_Delay(10); // 小的延时以减少CPU负载
+
     /* USER CODE END WHILE */
 
     /* USER CODE BEGIN 3 */
-  }
+    }
   /* USER CODE END 3 */
 }
 
@@ -532,7 +591,33 @@ void SystemClock_Config(void)
 }
 
 /* USER CODE BEGIN 4 */
+/* USER CODE BEGIN 4 */
+/**
+  * @brief 串口接收完成回调函数
+  */
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+    if(huart->Instance == USART1)
+    {
+        uart_rx_complete = 1;
+        // 注意：这里需要根据你的协议确定实际接收的数据长度
+        // 如果是固定长度协议，可以直接使用固定值
+        // 如果是可变长度协议，需要解析数据包获取实际长度
+        rx_data_length = RX_BUFFER_SIZE; // 或者根据协议解析的实际长度
+    }
+}
 
+/**
+  * @brief 串口接收错误回调函数
+  */
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+    if(huart->Instance == USART1)
+    {
+        // 重新启动DMA接收
+        HAL_UART_Receive_DMA(&huart1, uart_rx_buffer, RX_BUFFER_SIZE);
+    }
+}
 /* USER CODE END 4 */
 
 /**

Software/slave/PressureSensorBoard-slave/Core/Src/usart.c

@@ -40,7 +40,7 @@ void MX_USART1_UART_Init(void)
 
   /* USER CODE END USART1_Init 1 */
   huart1.Instance = USART1;
-  huart1.Init.BaudRate = 115200;
+  huart1.Init.BaudRate = 9600;
   huart1.Init.WordLength = UART_WORDLENGTH_8B;
   huart1.Init.StopBits = UART_STOPBITS_1;
   huart1.Init.Parity = UART_PARITY_NONE;
@@ -93,7 +93,7 @@ void HAL_UART_MspInit(UART_HandleTypeDef* uartHandle)
     hdma_usart1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
     hdma_usart1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
     hdma_usart1_rx.Init.Mode = DMA_NORMAL;
-    hdma_usart1_rx.Init.Priority = DMA_PRIORITY_MEDIUM;
+    hdma_usart1_rx.Init.Priority = DMA_PRIORITY_LOW;
     if (HAL_DMA_Init(&hdma_usart1_rx) != HAL_OK)
     {
       Error_Handler();

Software/slave/PressureSensorBoard-slave/MDK-ARM/PressureSensorBoard-slave.uvoptx

@@ -1,4 +1,4 @@
-<?xml version="1.0" encoding="UTF-8"?>
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
 <ProjectOpt xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_optx.xsd">
 
   <SchemaVersion>1.0</SchemaVersion>
@@ -45,7 +45,7 @@
         <PageWidth>79</PageWidth>
         <PageLength>66</PageLength>
         <TabStop>8</TabStop>
-        <ListingPath />
+        <ListingPath></ListingPath>
       </OPTLEX>
       <ListingPage>
         <CreateCListing>1</CreateCListing>
@@ -104,16 +104,16 @@
         <bSchkAxf>0</bSchkAxf>
         <bTchkAxf>0</bTchkAxf>
         <nTsel>6</nTsel>
-        <sDll />
+        <sDll></sDll>
-        <sDllPa />
+        <sDllPa></sDllPa>
-        <sDlgDll />
+        <sDlgDll></sDlgDll>
-        <sDlgPa />
+        <sDlgPa></sDlgPa>
-        <sIfile />
+        <sIfile></sIfile>
-        <tDll />
+        <tDll></tDll>
-        <tDllPa />
+        <tDllPa></tDllPa>
-        <tDlgDll />
+        <tDlgDll></tDlgDll>
-        <tDlgPa />
+        <tDlgPa></tDlgPa>
-        <tIfile />
+        <tIfile></tIfile>
         <pMon>STLink\ST-LINKIII-KEIL_SWO.dll</pMon>
       </DebugOpt>
       <TargetDriverDllRegistry>
@@ -130,7 +130,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ARMDBGFLAGS</Key>
-          <Name />
+          <Name></Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -153,24 +153,7 @@
           <Name>-U( -O2254 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(1BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128.FLM -FS08000000 -FL010000 -FP0($$Device:STM32F103C8$Flash\STM32F10x_128.FLM) -WA0 -WE0 -WVCE4 -WS2710 -WM0 -WP2 -WK0-R0</Name>
         </SetRegEntry>
       </TargetDriverDllRegistry>
-      <Breakpoint>
+      <Breakpoint/>
-        <Bp>
-          <Number>0</Number>
-          <Type>0</Type>
-          <LineNumber>297</LineNumber>
-          <EnabledFlag>1</EnabledFlag>
-          <Address>0</Address>
-          <ByteObject>0</ByteObject>
-          <HtxType>0</HtxType>
-          <ManyObjects>0</ManyObjects>
-          <SizeOfObject>0</SizeOfObject>
-          <BreakByAccess>0</BreakByAccess>
-          <BreakIfRCount>0</BreakIfRCount>
-          <Filename>../Core/Src/main.c</Filename>
-          <ExecCommand />
-          <Expression />
-        </Bp>
-      </Breakpoint>
       <Tracepoint>
         <THDelay>0</THDelay>
       </Tracepoint>
@@ -200,19 +183,19 @@
         <newCpu>0</newCpu>
         <uProt>0</uProt>
       </DebugFlag>
-      <LintExecutable />
+      <LintExecutable></LintExecutable>
-      <LintConfigFile />
+      <LintConfigFile></LintConfigFile>
       <bLintAuto>0</bLintAuto>
       <bAutoGenD>0</bAutoGenD>
       <LntExFlags>0</LntExFlags>
-      <pMisraName />
+      <pMisraName></pMisraName>
-      <pszMrule />
+      <pszMrule></pszMrule>
-      <pSingCmds />
+      <pSingCmds></pSingCmds>
-      <pMultCmds />
+      <pMultCmds></pMultCmds>
-      <pMisraNamep />
+      <pMisraNamep></pMisraNamep>
-      <pszMrulep />
+      <pszMrulep></pszMrulep>
-      <pSingCmdsp />
+      <pSingCmdsp></pSingCmdsp>
-      <pMultCmdsp />
+      <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
         <Enable>1</Enable>
         <EnableFlashSeq>0</EnableFlashSeq>

Software/slave/PressureSensorBoard-slave/MDK-ARM/PressureSensorBoard-slave.uvprojx

@@ -1,7 +1,10 @@
-<?xml version="1.0" encoding="UTF-8"?>
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
-<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" noNamespaceSchemaLocation="project_projx.xsd">
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
   <SchemaVersion>2.1</SchemaVersion>
+
   <Header>### uVision Project, (C) Keil Software</Header>
+
   <Targets>
     <Target>
       <TargetName>PressureSensorBoard-slave</TargetName>
@@ -16,28 +19,28 @@
           <PackID>Keil.STM32F1xx_DFP.2.4.1</PackID>
           <PackURL>https://www.keil.com/pack/</PackURL>
           <Cpu>IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x800FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") TZ</Cpu>
-          <FlashUtilSpec />
+          <FlashUtilSpec></FlashUtilSpec>
-          <StartupFile />
+          <StartupFile></StartupFile>
-          <FlashDriverDll />
+          <FlashDriverDll></FlashDriverDll>
           <DeviceId>0</DeviceId>
-          <RegisterFile />
+          <RegisterFile></RegisterFile>
-          <MemoryEnv />
+          <MemoryEnv></MemoryEnv>
-          <Cmp />
+          <Cmp></Cmp>
-          <Asm />
+          <Asm></Asm>
-          <Linker />
+          <Linker></Linker>
-          <OHString />
+          <OHString></OHString>
-          <InfinionOptionDll />
+          <InfinionOptionDll></InfinionOptionDll>
-          <SLE66CMisc />
+          <SLE66CMisc></SLE66CMisc>
-          <SLE66AMisc />
+          <SLE66AMisc></SLE66AMisc>
-          <SLE66LinkerMisc />
+          <SLE66LinkerMisc></SLE66LinkerMisc>
           <SFDFile>$$Device:STM32F103C8$SVD\STM32F103xx.svd</SFDFile>
           <bCustSvd>0</bCustSvd>
           <UseEnv>0</UseEnv>
-          <BinPath />
+          <BinPath></BinPath>
-          <IncludePath />
+          <IncludePath></IncludePath>
-          <LibPath />
+          <LibPath></LibPath>
-          <RegisterFilePath />
+          <RegisterFilePath></RegisterFilePath>
-          <DBRegisterFilePath />
+          <DBRegisterFilePath></DBRegisterFilePath>
           <TargetStatus>
             <Error>0</Error>
             <ExitCodeStop>0</ExitCodeStop>
@@ -52,15 +55,15 @@
           <CreateHexFile>1</CreateHexFile>
           <DebugInformation>1</DebugInformation>
           <BrowseInformation>1</BrowseInformation>
-          <ListingPath />
+          <ListingPath></ListingPath>
           <HexFormatSelection>1</HexFormatSelection>
           <Merge32K>0</Merge32K>
           <CreateBatchFile>0</CreateBatchFile>
           <BeforeCompile>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
+            <UserProg1Name></UserProg1Name>
-            <UserProg2Name />
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopU1X>0</nStopU1X>
@@ -69,8 +72,8 @@
           <BeforeMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>0</RunUserProg2>
-            <UserProg1Name />
+            <UserProg1Name></UserProg1Name>
-            <UserProg2Name />
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopB1X>0</nStopB1X>
@@ -79,15 +82,15 @@
           <AfterMake>
             <RunUserProg1>0</RunUserProg1>
             <RunUserProg2>1</RunUserProg2>
-            <UserProg1Name />
+            <UserProg1Name></UserProg1Name>
-            <UserProg2Name />
+            <UserProg2Name></UserProg2Name>
             <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
             <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
             <nStopA1X>0</nStopA1X>
             <nStopA2X>0</nStopA2X>
           </AfterMake>
           <SelectedForBatchBuild>1</SelectedForBatchBuild>
-          <SVCSIdString />
+          <SVCSIdString></SVCSIdString>
         </TargetCommonOption>
         <CommonProperty>
           <UseCPPCompiler>0</UseCPPCompiler>
@@ -101,8 +104,8 @@
           <AssembleAssemblyFile>0</AssembleAssemblyFile>
           <PublicsOnly>0</PublicsOnly>
           <StopOnExitCode>3</StopOnExitCode>
-          <CustomArgument />
+          <CustomArgument></CustomArgument>
-          <IncludeLibraryModules />
+          <IncludeLibraryModules></IncludeLibraryModules>
           <ComprImg>0</ComprImg>
         </CommonProperty>
         <DllOption>
@@ -111,7 +114,7 @@
           <SimDlgDll>DCM.DLL</SimDlgDll>
           <SimDlgDllArguments>-pCM3</SimDlgDllArguments>
           <TargetDllName>SARMCM3.DLL</TargetDllName>
-          <TargetDllArguments />
+          <TargetDllArguments></TargetDllArguments>
           <TargetDlgDll>TCM.DLL</TargetDlgDll>
           <TargetDlgDllArguments>-pCM3</TargetDlgDllArguments>
         </DllOption>
@@ -135,11 +138,11 @@
           </Flash1>
           <bUseTDR>1</bUseTDR>
           <Flash2>BIN\UL2V8M.DLL</Flash2>
-          <Flash3 />
+          <Flash3></Flash3>
-          <Flash4 />
+          <Flash4></Flash4>
-          <pFcarmOut />
+          <pFcarmOut></pFcarmOut>
-          <pFcarmGrp />
+          <pFcarmGrp></pFcarmGrp>
-          <pFcArmRoot />
+          <pFcArmRoot></pFcArmRoot>
           <FcArmLst>0</FcArmLst>
         </Utilities>
         <TargetArmAds>
@@ -172,7 +175,7 @@
             <RvctClst>0</RvctClst>
             <GenPPlst>0</GenPPlst>
             <AdsCpuType>"Cortex-M3"</AdsCpuType>
-            <RvctDeviceName />
+            <RvctDeviceName></RvctDeviceName>
             <mOS>0</mOS>
             <uocRom>0</uocRom>
             <uocRam>0</uocRam>
@@ -307,7 +310,7 @@
                 <Size>0x0</Size>
               </OCR_RVCT10>
             </OnChipMemories>
-            <RvctStartVector />
+            <RvctStartVector></RvctStartVector>
           </ArmAdsMisc>
           <Cads>
             <interw>1</interw>
@@ -334,9 +337,9 @@
             <v6WtE>0</v6WtE>
             <v6Rtti>0</v6Rtti>
             <VariousControls>
-              <MiscControls />
+              <MiscControls></MiscControls>
               <Define>USE_HAL_DRIVER,STM32F103xB</Define>
-              <Undefine />
+              <Undefine></Undefine>
               <IncludePath>../Core/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc;../Drivers/STM32F1xx_HAL_Driver/Inc/Legacy;../Drivers/CMSIS/Device/ST/STM32F1xx/Include;../Drivers/CMSIS/Include</IncludePath>
             </VariousControls>
           </Cads>
@@ -352,10 +355,10 @@
             <useXO>0</useXO>
             <ClangAsOpt>1</ClangAsOpt>
             <VariousControls>
-              <MiscControls />
+              <MiscControls></MiscControls>
-              <Define />
+              <Define></Define>
-              <Undefine />
+              <Undefine></Undefine>
-              <IncludePath />
+              <IncludePath></IncludePath>
             </VariousControls>
           </Aads>
           <LDads>
@@ -365,15 +368,15 @@
             <noStLib>0</noStLib>
             <RepFail>1</RepFail>
             <useFile>0</useFile>
-            <TextAddressRange />
+            <TextAddressRange></TextAddressRange>
-            <DataAddressRange />
+            <DataAddressRange></DataAddressRange>
-            <pXoBase />
+            <pXoBase></pXoBase>
-            <ScatterFile />
+            <ScatterFile></ScatterFile>
-            <IncludeLibs />
+            <IncludeLibs></IncludeLibs>
-            <IncludeLibsPath />
+            <IncludeLibsPath></IncludeLibsPath>
-            <Misc />
+            <Misc></Misc>
-            <LinkerInputFile />
+            <LinkerInputFile></LinkerInputFile>
-            <DisabledWarnings />
+            <DisabledWarnings></DisabledWarnings>
           </LDads>
         </TargetArmAds>
       </TargetOption>
@@ -423,6 +426,8 @@
                   <AssembleAssemblyFile>2</AssembleAssemblyFile>
                   <PublicsOnly>2</PublicsOnly>
                   <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
                   <ComprImg>1</ComprImg>
                 </CommonProperty>
                 <FileArmAds>
@@ -450,6 +455,12 @@
                     <v6Lto>2</v6Lto>
                     <v6WtE>2</v6WtE>
                     <v6Rtti>2</v6Rtti>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
                   </Cads>
                 </FileArmAds>
               </FileOption>
@@ -471,6 +482,8 @@
                   <AssembleAssemblyFile>2</AssembleAssemblyFile>
                   <PublicsOnly>2</PublicsOnly>
                   <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
                   <ComprImg>1</ComprImg>
                 </CommonProperty>
                 <FileArmAds>
@@ -498,6 +511,12 @@
                     <v6Lto>2</v6Lto>
                     <v6WtE>2</v6WtE>
                     <v6Rtti>2</v6Rtti>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
                   </Cads>
                 </FileArmAds>
               </FileOption>
@@ -599,6 +618,8 @@
                   <AssembleAssemblyFile>2</AssembleAssemblyFile>
                   <PublicsOnly>2</PublicsOnly>
                   <StopOnExitCode>11</StopOnExitCode>
+                  <CustomArgument></CustomArgument>
+                  <IncludeLibraryModules></IncludeLibraryModules>
                   <ComprImg>1</ComprImg>
                 </CommonProperty>
                 <FileArmAds>
@@ -626,6 +647,12 @@
                     <v6Lto>2</v6Lto>
                     <v6WtE>2</v6WtE>
                     <v6Rtti>2</v6Rtti>
+                    <VariousControls>
+                      <MiscControls></MiscControls>
+                      <Define></Define>
+                      <Undefine></Undefine>
+                      <IncludePath></IncludePath>
+                    </VariousControls>
                   </Cads>
                 </FileArmAds>
               </FileOption>
@@ -648,17 +675,18 @@
       </Groups>
     </Target>
   </Targets>
+
   <RTE>
-    <apis />
+    <apis/>
     <components>
       <component Cclass="CMSIS" Cgroup="CORE" Cvendor="ARM" Cversion="4.3.0" condition="CMSIS Core">
-        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0" />
+        <package name="CMSIS" schemaVersion="1.3" url="http://www.keil.com/pack/" vendor="ARM" version="4.5.0"/>
         <targetInfos>
-          <targetInfo name="PressureSensorBoard-slave" />
+          <targetInfo name="PressureSensorBoard-slave"/>
         </targetInfos>
       </component>
     </components>
-    <files />
+    <files/>
   </RTE>
-</Project>
 
+</Project>

Software/slave/PressureSensorBoard-slave/MDK-ARM/PressureSensorBoard-slave/ExtDll.iex

@@ -0,0 +1,2 @@
+[EXTDLL]
+Count=0

Software/slave/PressureSensorBoard-slave/MDK-ARM/PressureSensorBoard-slave/PressureSensorBoard-slave.build_log.htm

@@ -22,37 +22,11 @@ Dialog DLL:      TCM.DLL V1.56.4.0
  
 <h2>Project:</h2>
 C:\Users\15435\Desktop\PressureSensorBoard\Software\slave\PressureSensorBoard-slave\MDK-ARM\PressureSensorBoard-slave.uvprojx
-Project File Date:  10/26/2025
+Project File Date:  11/12/2025
 
 <h2>Output:</h2>
 *** Using Compiler 'V5.06 update 7 (build 960)', folder: 'C:\app\Keil_v5\ARM\ARMCC\Bin'
-Rebuild target 'PressureSensorBoard-slave'
+Build target 'PressureSensorBoard-slave'
-assembling startup_stm32f103xb.s...
-compiling stm32f1xx_hal_gpio_ex.c...
-compiling stm32f1xx_it.c...
-compiling stm32f1xx_hal_msp.c...
-compiling stm32f1xx_hal.c...
-compiling stm32f1xx_hal_cortex.c...
-compiling stm32f1xx_hal_rcc_ex.c...
-compiling stm32f1xx_hal_gpio.c...
-compiling gpio.c...
-compiling main.c...
-compiling usart.c...
-compiling adc.c...
-compiling dma.c...
-compiling stm32f1xx_hal_dma.c...
-compiling stm32f1xx_hal_rcc.c...
-compiling stm32f1xx_hal_adc_ex.c...
-compiling stm32f1xx_hal_adc.c...
-compiling stm32f1xx_hal_pwr.c...
-compiling stm32f1xx_hal_exti.c...
-compiling system_stm32f1xx.c...
-compiling stm32f1xx_hal_flash.c...
-compiling stm32f1xx_hal_flash_ex.c...
-compiling stm32f1xx_hal_uart.c...
-linking...
-Program Size: Code=7468 RO-data=312 RW-data=32 ZI-data=1400  
-FromELF: creating hex file...
 "PressureSensorBoard-slave\PressureSensorBoard-slave.axf" - 0 Error(s), 0 Warning(s).
 
 <h2>Software Packages used:</h2>
@@ -77,7 +51,7 @@ Package Vendor: Keil
 
    * Component: ARM::CMSIS:CORE@6.1.0
       Include file:  CMSIS/Core/Include/tz_context.h
-Build Time Elapsed:  00:00:03
+Build Time Elapsed:  00:00:00
 </pre>
 </body>
 </html>

Software/slave/PressureSensorBoard-slave/MDK-ARM/PressureSensorBoard-slave/PressureSensorBoard-slave.htm

@@ -3,7 +3,7 @@
 <title>Static Call Graph - [PressureSensorBoard-slave\PressureSensorBoard-slave.axf]</title></head>
 <body><HR>
 <H1>Static Call Graph for image PressureSensorBoard-slave\PressureSensorBoard-slave.axf</H1><HR>
-<BR><P>#&#060CALLGRAPH&#062# ARM Linker, 5060960: Last Updated: Thu Nov 06 15:30:36 2025
+<BR><P>#&#060CALLGRAPH&#062# ARM Linker, 5060960: Last Updated: Wed Nov 12 16:19:11 2025
 <BR><P>
 <H3>Maximum Stack Usage =        152 bytes + Unknown(Cycles, Untraceable Function Pointers)</H3><H3>
 Call chain for Maximum Stack Depth:</H3>
@@ -12,13 +12,13 @@ main &rArr; SystemClock_Config &rArr; HAL_RCC_ClockConfig &rArr; HAL_InitTick &r
 <H3>
 Mutually Recursive functions
 </H3> <LI><a href="#[1c]">ADC1_2_IRQHandler</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[1c]">ADC1_2_IRQHandler</a><BR>
+ <LI><a href="#[84]">UART_EndRxTransfer</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[84]">UART_EndRxTransfer</a><BR>
  <LI><a href="#[4]">BusFault_Handler</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[4]">BusFault_Handler</a><BR>
  <LI><a href="#[2]">HardFault_Handler</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[2]">HardFault_Handler</a><BR>
  <LI><a href="#[3]">MemManage_Handler</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[3]">MemManage_Handler</a><BR>
  <LI><a href="#[1]">NMI_Handler</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[1]">NMI_Handler</a><BR>
  <LI><a href="#[5]">UsageFault_Handler</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[5]">UsageFault_Handler</a><BR>
- <LI><a href="#[81]">UART_EndRxTransfer</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[81]">UART_EndRxTransfer</a><BR>
+ <LI><a href="#[83]">UART_EndTxTransfer</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[83]">UART_EndTxTransfer</a><BR>
- <LI><a href="#[80]">UART_EndTxTransfer</a>&nbsp;&nbsp;&nbsp;&rArr;&nbsp;&nbsp;&nbsp;<a href="#[80]">UART_EndTxTransfer</a><BR>
 </UL>
 <P>
 <H3>
@@ -35,7 +35,7 @@ Function Pointers
  <LI><a href="#[16]">DMA1_Channel2_IRQHandler</a> from startup_stm32f103xb.o(.text) referenced from startup_stm32f103xb.o(RESET)
  <LI><a href="#[17]">DMA1_Channel3_IRQHandler</a> from startup_stm32f103xb.o(.text) referenced from startup_stm32f103xb.o(RESET)
  <LI><a href="#[18]">DMA1_Channel4_IRQHandler</a> from startup_stm32f103xb.o(.text) referenced from startup_stm32f103xb.o(RESET)
- <LI><a href="#[19]">DMA1_Channel5_IRQHandler</a> from startup_stm32f103xb.o(.text) referenced from startup_stm32f103xb.o(RESET)
+ <LI><a href="#[19]">DMA1_Channel5_IRQHandler</a> from stm32f1xx_it.o(i.DMA1_Channel5_IRQHandler) referenced from startup_stm32f103xb.o(RESET)
  <LI><a href="#[1a]">DMA1_Channel6_IRQHandler</a> from startup_stm32f103xb.o(.text) referenced from startup_stm32f103xb.o(RESET)
  <LI><a href="#[1b]">DMA1_Channel7_IRQHandler</a> from startup_stm32f103xb.o(.text) referenced from startup_stm32f103xb.o(RESET)
  <LI><a href="#[7]">DebugMon_Handler</a> from stm32f1xx_it.o(i.DebugMon_Handler) referenced from startup_stm32f103xb.o(RESET)
@@ -94,7 +94,7 @@ Global Symbols
 <P><STRONG><a name="[37]"></a>__main</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry.o(.ARM.Collect$$$$00000000))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(.text)
 </UL>
-<P><STRONG><a name="[88]"></a>_main_stk</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry2.o(.ARM.Collect$$$$00000001))
+<P><STRONG><a name="[89]"></a>_main_stk</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry2.o(.ARM.Collect$$$$00000001))
 
 <P><STRONG><a name="[3e]"></a>_main_scatterload</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry5.o(.ARM.Collect$$$$00000004))
 <BR><BR>[Calls]<UL><LI><a href="#[3f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__scatterload
@@ -104,17 +104,17 @@ Global Symbols
 <BR><BR>[Called By]<UL><LI><a href="#[3f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__scatterload
 </UL>
 
-<P><STRONG><a name="[89]"></a>_main_clock</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry7b.o(.ARM.Collect$$$$00000008))
+<P><STRONG><a name="[8a]"></a>_main_clock</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry7b.o(.ARM.Collect$$$$00000008))
 
-<P><STRONG><a name="[8a]"></a>_main_cpp_init</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry8b.o(.ARM.Collect$$$$0000000A))
+<P><STRONG><a name="[8b]"></a>_main_cpp_init</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry8b.o(.ARM.Collect$$$$0000000A))
 
-<P><STRONG><a name="[8b]"></a>_main_init</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry9a.o(.ARM.Collect$$$$0000000B))
+<P><STRONG><a name="[8c]"></a>_main_init</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry9a.o(.ARM.Collect$$$$0000000B))
 
-<P><STRONG><a name="[8c]"></a>__rt_lib_shutdown_fini</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry12b.o(.ARM.Collect$$$$0000000E))
+<P><STRONG><a name="[8d]"></a>__rt_lib_shutdown_fini</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry12b.o(.ARM.Collect$$$$0000000E))
 
-<P><STRONG><a name="[8d]"></a>__rt_final_cpp</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry10a.o(.ARM.Collect$$$$0000000F))
+<P><STRONG><a name="[8e]"></a>__rt_final_cpp</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry10a.o(.ARM.Collect$$$$0000000F))
 
-<P><STRONG><a name="[8e]"></a>__rt_final_exit</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry11a.o(.ARM.Collect$$$$00000011))
+<P><STRONG><a name="[8f]"></a>__rt_final_exit</STRONG> (Thumb, 0 bytes, Stack size unknown bytes, entry11a.o(.ARM.Collect$$$$00000011))
 
 <P><STRONG><a name="[0]"></a>Reset_Handler</STRONG> (Thumb, 8 bytes, Stack size 0 bytes, startup_stm32f103xb.o(.text))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
@@ -141,9 +141,6 @@ Global Symbols
 <P><STRONG><a name="[18]"></a>DMA1_Channel4_IRQHandler</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f103xb.o(.text))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
-<P><STRONG><a name="[19]"></a>DMA1_Channel5_IRQHandler</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f103xb.o(.text))
-<BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
-</UL>
 <P><STRONG><a name="[1a]"></a>DMA1_Channel6_IRQHandler</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f103xb.o(.text))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
@@ -249,44 +246,57 @@ Global Symbols
 <P><STRONG><a name="[a]"></a>WWDG_IRQHandler</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, startup_stm32f103xb.o(.text))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
+<P><STRONG><a name="[90]"></a>__aeabi_memcpy</STRONG> (Thumb, 36 bytes, Stack size 0 bytes, memcpya.o(.text), UNUSED)
+
+<P><STRONG><a name="[55]"></a>__aeabi_memcpy4</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memcpya.o(.text))
+<BR><BR>[Called By]<UL><LI><a href="#[47]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_ErrorCallback
+</UL>
+
+<P><STRONG><a name="[91]"></a>__aeabi_memcpy8</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memcpya.o(.text), UNUSED)
+
 <P><STRONG><a name="[41]"></a>__aeabi_memset</STRONG> (Thumb, 14 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
 <BR><BR>[Called By]<UL><LI><a href="#[42]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;_memset$wrapper
 <LI><a href="#[40]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__aeabi_memclr
 </UL>
 
-<P><STRONG><a name="[8f]"></a>__aeabi_memset4</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
+<P><STRONG><a name="[92]"></a>__aeabi_memset4</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
 
-<P><STRONG><a name="[90]"></a>__aeabi_memset8</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
+<P><STRONG><a name="[93]"></a>__aeabi_memset8</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
 
 <P><STRONG><a name="[40]"></a>__aeabi_memclr</STRONG> (Thumb, 4 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
 <BR><BR>[Calls]<UL><LI><a href="#[41]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__aeabi_memset
 </UL>
 
-<P><STRONG><a name="[7f]"></a>__aeabi_memclr4</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text))
+<P><STRONG><a name="[82]"></a>__aeabi_memclr4</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text))
-<BR><BR>[Called By]<UL><LI><a href="#[7e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
+<BR><BR>[Called By]<UL><LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
 </UL>
 
-<P><STRONG><a name="[91]"></a>__aeabi_memclr8</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
+<P><STRONG><a name="[94]"></a>__aeabi_memclr8</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, memseta.o(.text), UNUSED)
 
 <P><STRONG><a name="[42]"></a>_memset$wrapper</STRONG> (Thumb, 18 bytes, Stack size 8 bytes, memseta.o(.text), UNUSED)
 <BR><BR>[Calls]<UL><LI><a href="#[41]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__aeabi_memset
 </UL>
 
+<P><STRONG><a name="[56]"></a>strlen</STRONG> (Thumb, 14 bytes, Stack size 0 bytes, strlen.o(.text))
+<BR><BR>[Called By]<UL><LI><a href="#[47]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_ErrorCallback
+</UL>
+
 <P><STRONG><a name="[3f]"></a>__scatterload</STRONG> (Thumb, 28 bytes, Stack size 0 bytes, init.o(.text))
 <BR><BR>[Calls]<UL><LI><a href="#[43]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__main_after_scatterload
 </UL>
 <BR>[Called By]<UL><LI><a href="#[3e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;_main_scatterload
 </UL>
 
-<P><STRONG><a name="[92]"></a>__scatterload_rt2</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, init.o(.text), UNUSED)
+<P><STRONG><a name="[95]"></a>__scatterload_rt2</STRONG> (Thumb, 0 bytes, Stack size 0 bytes, init.o(.text), UNUSED)
 
 <P><STRONG><a name="[44]"></a>ADC_ConversionStop_Disable</STRONG> (Thumb, 86 bytes, Stack size 16 bytes, stm32f1xx_hal_adc.o(i.ADC_ConversionStop_Disable))
 <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = ADC_ConversionStop_Disable
 </UL>
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
 </UL>
-<BR>[Called By]<UL><LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Init
+<BR>[Called By]<UL><LI><a href="#[58]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Init
 <LI><a href="#[52]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Stop_DMA
+<LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADCEx_Calibration_Start
 </UL>
 
 <P><STRONG><a name="[38]"></a>ADC_DMAConvCplt</STRONG> (Thumb, 78 bytes, Stack size 8 bytes, stm32f1xx_hal_adc.o(i.ADC_DMAConvCplt))
@@ -297,7 +307,7 @@ Global Symbols
 <BR>[Address Reference Count : 1]<UL><LI> stm32f1xx_hal_adc.o(i.HAL_ADC_Start_DMA)
 </UL>
 <P><STRONG><a name="[3a]"></a>ADC_DMAError</STRONG> (Thumb, 26 bytes, Stack size 8 bytes, stm32f1xx_hal_adc.o(i.ADC_DMAError))
-<BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = ADC_DMAError
+<BR><BR>[Stack]<UL><LI>Max Depth = 104<LI>Call Chain = ADC_DMAError &rArr; HAL_ADC_ErrorCallback &rArr; HAL_UART_Transmit &rArr; UART_WaitOnFlagUntilTimeout
 </UL>
 <BR>[Calls]<UL><LI><a href="#[47]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_ErrorCallback
 </UL>
@@ -316,6 +326,7 @@ Global Symbols
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
 </UL>
 <BR>[Called By]<UL><LI><a href="#[4b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Start_DMA
+<LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADCEx_Calibration_Start
 </UL>
 
 <P><STRONG><a name="[4a]"></a>ADC_Start_Conversion</STRONG> (Thumb, 22 bytes, Stack size 8 bytes, main.o(i.ADC_Start_Conversion))
@@ -323,7 +334,7 @@ Global Symbols
 </UL>
 <BR>[Calls]<UL><LI><a href="#[4b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Start_DMA
 </UL>
-<BR>[Called By]<UL><LI><a href="#[75]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Scan_Next_Row
+<BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
 <P><STRONG><a name="[4]"></a>BusFault_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.BusFault_Handler))
@@ -333,12 +344,11 @@ Global Symbols
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
-<P><STRONG><a name="[7c]"></a>Calculate_CRC16</STRONG> (Thumb, 52 bytes, Stack size 16 bytes, main.o(i.Calculate_CRC16))
+<P><STRONG><a name="[7f]"></a>Calculate_CRC16</STRONG> (Thumb, 52 bytes, Stack size 16 bytes, main.o(i.Calculate_CRC16))
 <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = Calculate_CRC16
 </UL>
-<BR>[Called By]<UL><LI><a href="#[78]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Verify_CRC16
+<BR>[Called By]<UL><LI><a href="#[7d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Status_Response
-<LI><a href="#[7a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Status_Response
+<LI><a href="#[7c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
-<LI><a href="#[79]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
 </UL>
 
 <P><STRONG><a name="[15]"></a>DMA1_Channel1_IRQHandler</STRONG> (Thumb, 6 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.DMA1_Channel1_IRQHandler))
@@ -348,6 +358,13 @@ Global Symbols
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
+<P><STRONG><a name="[19]"></a>DMA1_Channel5_IRQHandler</STRONG> (Thumb, 6 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.DMA1_Channel5_IRQHandler))
+<BR><BR>[Stack]<UL><LI>Max Depth = 40<LI>Call Chain = DMA1_Channel5_IRQHandler &rArr; HAL_DMA_IRQHandler
+</UL>
+<BR>[Calls]<UL><LI><a href="#[4c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_IRQHandler
+</UL>
+<BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
+</UL>
 <P><STRONG><a name="[7]"></a>DebugMon_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.DebugMon_Handler))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
@@ -370,19 +387,31 @@ Global Symbols
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
-<P><STRONG><a name="[57]"></a>Error_Handler</STRONG> (Thumb, 4 bytes, Stack size 0 bytes, main.o(i.Error_Handler))
+<P><STRONG><a name="[5c]"></a>Error_Handler</STRONG> (Thumb, 4 bytes, Stack size 0 bytes, main.o(i.Error_Handler))
-<BR><BR>[Called By]<UL><LI><a href="#[54]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
+<BR><BR>[Called By]<UL><LI><a href="#[6f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_MspInit
-<LI><a href="#[74]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_USART1_UART_Init
+<LI><a href="#[59]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
-<LI><a href="#[6e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
+<LI><a href="#[79]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_USART1_UART_Init
+<LI><a href="#[73]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
 </UL>
 
-<P><STRONG><a name="[6f]"></a>HAL_ADC_ConfigChannel</STRONG> (Thumb, 240 bytes, Stack size 24 bytes, stm32f1xx_hal_adc.o(i.HAL_ADC_ConfigChannel))
+<P><STRONG><a name="[53]"></a>HAL_ADCEx_Calibration_Start</STRONG> (Thumb, 210 bytes, Stack size 24 bytes, stm32f1xx_hal_adc_ex.o(i.HAL_ADCEx_Calibration_Start))
+<BR><BR>[Stack]<UL><LI>Max Depth = 48<LI>Call Chain = HAL_ADCEx_Calibration_Start &rArr; ADC_Enable
+</UL>
+<BR>[Calls]<UL><LI><a href="#[54]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCCEx_GetPeriphCLKFreq
+<LI><a href="#[49]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_Enable
+<LI><a href="#[44]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_ConversionStop_Disable
+<LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
+</UL>
+<BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
+</UL>
+
+<P><STRONG><a name="[74]"></a>HAL_ADC_ConfigChannel</STRONG> (Thumb, 240 bytes, Stack size 24 bytes, stm32f1xx_hal_adc.o(i.HAL_ADC_ConfigChannel))
 <BR><BR>[Stack]<UL><LI>Max Depth = 24<LI>Call Chain = HAL_ADC_ConfigChannel
 </UL>
-<BR>[Called By]<UL><LI><a href="#[6e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
+<BR>[Called By]<UL><LI><a href="#[73]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
 </UL>
 
-<P><STRONG><a name="[46]"></a>HAL_ADC_ConvCpltCallback</STRONG> (Thumb, 48 bytes, Stack size 8 bytes, main.o(i.HAL_ADC_ConvCpltCallback))
+<P><STRONG><a name="[46]"></a>HAL_ADC_ConvCpltCallback</STRONG> (Thumb, 44 bytes, Stack size 8 bytes, main.o(i.HAL_ADC_ConvCpltCallback))
 <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = HAL_ADC_ConvCpltCallback
 </UL>
 <BR>[Called By]<UL><LI><a href="#[38]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_DMAConvCplt
@@ -392,33 +421,39 @@ Global Symbols
 <BR><BR>[Called By]<UL><LI><a href="#[39]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_DMAHalfConvCplt
 </UL>
 
-<P><STRONG><a name="[47]"></a>HAL_ADC_ErrorCallback</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_hal_adc.o(i.HAL_ADC_ErrorCallback))
+<P><STRONG><a name="[47]"></a>HAL_ADC_ErrorCallback</STRONG> (Thumb, 38 bytes, Stack size 32 bytes, main.o(i.HAL_ADC_ErrorCallback))
-<BR><BR>[Called By]<UL><LI><a href="#[3a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_DMAError
+<BR><BR>[Stack]<UL><LI>Max Depth = 96<LI>Call Chain = HAL_ADC_ErrorCallback &rArr; HAL_UART_Transmit &rArr; UART_WaitOnFlagUntilTimeout
+</UL>
+<BR>[Calls]<UL><LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
+<LI><a href="#[56]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;strlen
+<LI><a href="#[55]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__aeabi_memcpy4
+</UL>
+<BR>[Called By]<UL><LI><a href="#[3a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_DMAError
 </UL>
 
-<P><STRONG><a name="[53]"></a>HAL_ADC_Init</STRONG> (Thumb, 272 bytes, Stack size 24 bytes, stm32f1xx_hal_adc.o(i.HAL_ADC_Init))
+<P><STRONG><a name="[58]"></a>HAL_ADC_Init</STRONG> (Thumb, 272 bytes, Stack size 24 bytes, stm32f1xx_hal_adc.o(i.HAL_ADC_Init))
 <BR><BR>[Stack]<UL><LI>Max Depth = 104<LI>Call Chain = HAL_ADC_Init &rArr; HAL_ADC_MspInit &rArr; HAL_GPIO_Init
 </UL>
 <BR>[Calls]<UL><LI><a href="#[44]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_ConversionStop_Disable
-<LI><a href="#[54]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
+<LI><a href="#[59]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
 </UL>
-<BR>[Called By]<UL><LI><a href="#[6e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
+<BR>[Called By]<UL><LI><a href="#[73]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
 </UL>
 
-<P><STRONG><a name="[54]"></a>HAL_ADC_MspInit</STRONG> (Thumb, 122 bytes, Stack size 40 bytes, adc.o(i.HAL_ADC_MspInit))
+<P><STRONG><a name="[59]"></a>HAL_ADC_MspInit</STRONG> (Thumb, 124 bytes, Stack size 40 bytes, adc.o(i.HAL_ADC_MspInit))
 <BR><BR>[Stack]<UL><LI>Max Depth = 80<LI>Call Chain = HAL_ADC_MspInit &rArr; HAL_GPIO_Init
 </UL>
-<BR>[Calls]<UL><LI><a href="#[56]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Init
+<BR>[Calls]<UL><LI><a href="#[5b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Init
-<LI><a href="#[55]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_Init
+<LI><a href="#[5a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_Init
-<LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Error_Handler
+<LI><a href="#[5c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Error_Handler
 </UL>
-<BR>[Called By]<UL><LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Init
+<BR>[Called By]<UL><LI><a href="#[58]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Init
 </UL>
 
 <P><STRONG><a name="[4b]"></a>HAL_ADC_Start_DMA</STRONG> (Thumb, 246 bytes, Stack size 32 bytes, stm32f1xx_hal_adc.o(i.HAL_ADC_Start_DMA))
 <BR><BR>[Stack]<UL><LI>Max Depth = 60<LI>Call Chain = HAL_ADC_Start_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
 </UL>
-<BR>[Calls]<UL><LI><a href="#[58]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Start_IT
+<BR>[Calls]<UL><LI><a href="#[5d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Start_IT
 <LI><a href="#[49]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_Enable
 </UL>
 <BR>[Called By]<UL><LI><a href="#[4f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Device_Initialization
@@ -428,13 +463,13 @@ Global Symbols
 <P><STRONG><a name="[52]"></a>HAL_ADC_Stop_DMA</STRONG> (Thumb, 86 bytes, Stack size 8 bytes, stm32f1xx_hal_adc.o(i.HAL_ADC_Stop_DMA))
 <BR><BR>[Stack]<UL><LI>Max Depth = 24<LI>Call Chain = HAL_ADC_Stop_DMA &rArr; ADC_ConversionStop_Disable
 </UL>
-<BR>[Calls]<UL><LI><a href="#[59]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Abort
+<BR>[Calls]<UL><LI><a href="#[5e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Abort
 <LI><a href="#[44]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_ConversionStop_Disable
 </UL>
 <BR>[Called By]<UL><LI><a href="#[4f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Device_Initialization
 </UL>
 
-<P><STRONG><a name="[59]"></a>HAL_DMA_Abort</STRONG> (Thumb, 70 bytes, Stack size 8 bytes, stm32f1xx_hal_dma.o(i.HAL_DMA_Abort))
+<P><STRONG><a name="[5e]"></a>HAL_DMA_Abort</STRONG> (Thumb, 70 bytes, Stack size 8 bytes, stm32f1xx_hal_dma.o(i.HAL_DMA_Abort))
 <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = HAL_DMA_Abort
 </UL>
 <BR>[Called By]<UL><LI><a href="#[52]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Stop_DMA
@@ -443,22 +478,24 @@ Global Symbols
 <P><STRONG><a name="[4c]"></a>HAL_DMA_IRQHandler</STRONG> (Thumb, 316 bytes, Stack size 40 bytes, stm32f1xx_hal_dma.o(i.HAL_DMA_IRQHandler))
 <BR><BR>[Stack]<UL><LI>Max Depth = 40<LI>Call Chain = HAL_DMA_IRQHandler
 </UL>
-<BR>[Called By]<UL><LI><a href="#[15]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;DMA1_Channel1_IRQHandler
+<BR>[Called By]<UL><LI><a href="#[19]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;DMA1_Channel5_IRQHandler
+<LI><a href="#[15]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;DMA1_Channel1_IRQHandler
 </UL>
 
-<P><STRONG><a name="[56]"></a>HAL_DMA_Init</STRONG> (Thumb, 84 bytes, Stack size 12 bytes, stm32f1xx_hal_dma.o(i.HAL_DMA_Init))
+<P><STRONG><a name="[5b]"></a>HAL_DMA_Init</STRONG> (Thumb, 84 bytes, Stack size 12 bytes, stm32f1xx_hal_dma.o(i.HAL_DMA_Init))
 <BR><BR>[Stack]<UL><LI>Max Depth = 12<LI>Call Chain = HAL_DMA_Init
 </UL>
-<BR>[Called By]<UL><LI><a href="#[54]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
+<BR>[Called By]<UL><LI><a href="#[6f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_MspInit
+<LI><a href="#[59]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
 </UL>
 
-<P><STRONG><a name="[58]"></a>HAL_DMA_Start_IT</STRONG> (Thumb, 112 bytes, Stack size 16 bytes, stm32f1xx_hal_dma.o(i.HAL_DMA_Start_IT))
+<P><STRONG><a name="[5d]"></a>HAL_DMA_Start_IT</STRONG> (Thumb, 112 bytes, Stack size 16 bytes, stm32f1xx_hal_dma.o(i.HAL_DMA_Start_IT))
 <BR><BR>[Stack]<UL><LI>Max Depth = 28<LI>Call Chain = HAL_DMA_Start_IT &rArr; DMA_SetConfig
 </UL>
-<BR>[Calls]<UL><LI><a href="#[5a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;DMA_SetConfig
+<BR>[Calls]<UL><LI><a href="#[5f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;DMA_SetConfig
 </UL>
 <BR>[Called By]<UL><LI><a href="#[4b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Start_DMA
-<LI><a href="#[6a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_Start_Receive_DMA
+<LI><a href="#[71]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_Start_Receive_DMA
 </UL>
 
 <P><STRONG><a name="[51]"></a>HAL_Delay</STRONG> (Thumb, 32 bytes, Stack size 16 bytes, stm32f1xx_hal.o(i.HAL_Delay))
@@ -467,187 +504,202 @@ Global Symbols
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
-<LI><a href="#[75]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Scan_Next_Row
 <LI><a href="#[4f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Device_Initialization
 </UL>
 
-<P><STRONG><a name="[55]"></a>HAL_GPIO_Init</STRONG> (Thumb, 446 bytes, Stack size 40 bytes, stm32f1xx_hal_gpio.o(i.HAL_GPIO_Init))
+<P><STRONG><a name="[5a]"></a>HAL_GPIO_Init</STRONG> (Thumb, 446 bytes, Stack size 40 bytes, stm32f1xx_hal_gpio.o(i.HAL_GPIO_Init))
 <BR><BR>[Stack]<UL><LI>Max Depth = 40<LI>Call Chain = HAL_GPIO_Init
 </UL>
-<BR>[Called By]<UL><LI><a href="#[67]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_MspInit
+<BR>[Called By]<UL><LI><a href="#[6f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_MspInit
-<LI><a href="#[54]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
+<LI><a href="#[59]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_MspInit
-<LI><a href="#[72]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_GPIO_Init
+<LI><a href="#[77]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_GPIO_Init
 </UL>
 
 <P><STRONG><a name="[4e]"></a>HAL_GPIO_ReadPin</STRONG> (Thumb, 10 bytes, Stack size 0 bytes, stm32f1xx_hal_gpio.o(i.HAL_GPIO_ReadPin))
 <BR><BR>[Called By]<UL><LI><a href="#[4d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Device_Address_Init
 </UL>
 
-<P><STRONG><a name="[73]"></a>HAL_GPIO_WritePin</STRONG> (Thumb, 10 bytes, Stack size 0 bytes, stm32f1xx_hal_gpio.o(i.HAL_GPIO_WritePin))
+<P><STRONG><a name="[78]"></a>HAL_GPIO_WritePin</STRONG> (Thumb, 10 bytes, Stack size 0 bytes, stm32f1xx_hal_gpio.o(i.HAL_GPIO_WritePin))
-<BR><BR>[Called By]<UL><LI><a href="#[72]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_GPIO_Init
+<BR><BR>[Called By]<UL><LI><a href="#[77]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_GPIO_Init
-<LI><a href="#[76]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Select_Row
+<LI><a href="#[7b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
+<LI><a href="#[7a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Select_Row
 <LI><a href="#[50]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Reset_All_Rows
 </UL>
 
 <P><STRONG><a name="[45]"></a>HAL_GetTick</STRONG> (Thumb, 6 bytes, Stack size 0 bytes, stm32f1xx_hal.o(i.HAL_GetTick))
 <BR><BR>[Called By]<UL><LI><a href="#[49]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_Enable
 <LI><a href="#[44]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_ConversionStop_Disable
-<LI><a href="#[6c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
+<LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
-<LI><a href="#[65]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_OscConfig
+<LI><a href="#[6b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_OscConfig
-<LI><a href="#[63]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
+<LI><a href="#[69]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
-<LI><a href="#[62]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCCEx_PeriphCLKConfig
+<LI><a href="#[68]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCCEx_PeriphCLKConfig
 <LI><a href="#[51]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Delay
-<LI><a href="#[6d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_WaitOnFlagUntilTimeout
+<LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADCEx_Calibration_Start
+<LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
+<LI><a href="#[7a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Select_Row
+<LI><a href="#[72]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_WaitOnFlagUntilTimeout
 </UL>
 
-<P><STRONG><a name="[7d]"></a>HAL_IncTick</STRONG> (Thumb, 12 bytes, Stack size 0 bytes, stm32f1xx_hal.o(i.HAL_IncTick))
+<P><STRONG><a name="[80]"></a>HAL_IncTick</STRONG> (Thumb, 12 bytes, Stack size 0 bytes, stm32f1xx_hal.o(i.HAL_IncTick))
 <BR><BR>[Called By]<UL><LI><a href="#[9]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SysTick_Handler
 </UL>
 
-<P><STRONG><a name="[5b]"></a>HAL_Init</STRONG> (Thumb, 32 bytes, Stack size 8 bytes, stm32f1xx_hal.o(i.HAL_Init))
+<P><STRONG><a name="[60]"></a>HAL_Init</STRONG> (Thumb, 32 bytes, Stack size 8 bytes, stm32f1xx_hal.o(i.HAL_Init))
 <BR><BR>[Stack]<UL><LI>Max Depth = 40<LI>Call Chain = HAL_Init &rArr; HAL_InitTick &rArr; HAL_NVIC_SetPriority
 </UL>
-<BR>[Calls]<UL><LI><a href="#[5e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_MspInit
+<BR>[Calls]<UL><LI><a href="#[63]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_MspInit
-<LI><a href="#[5d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
+<LI><a href="#[62]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
-<LI><a href="#[5c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriorityGrouping
+<LI><a href="#[61]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriorityGrouping
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
-<P><STRONG><a name="[5d]"></a>HAL_InitTick</STRONG> (Thumb, 54 bytes, Stack size 16 bytes, stm32f1xx_hal.o(i.HAL_InitTick))
+<P><STRONG><a name="[62]"></a>HAL_InitTick</STRONG> (Thumb, 54 bytes, Stack size 16 bytes, stm32f1xx_hal.o(i.HAL_InitTick))
 <BR><BR>[Stack]<UL><LI>Max Depth = 32<LI>Call Chain = HAL_InitTick &rArr; HAL_NVIC_SetPriority
 </UL>
-<BR>[Calls]<UL><LI><a href="#[60]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriority
+<BR>[Calls]<UL><LI><a href="#[65]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriority
-<LI><a href="#[5f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_SYSTICK_Config
+<LI><a href="#[64]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_SYSTICK_Config
 </UL>
-<BR>[Called By]<UL><LI><a href="#[63]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
+<BR>[Called By]<UL><LI><a href="#[69]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
-<LI><a href="#[5b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
+<LI><a href="#[60]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
 </UL>
 
-<P><STRONG><a name="[5e]"></a>HAL_MspInit</STRONG> (Thumb, 52 bytes, Stack size 8 bytes, stm32f1xx_hal_msp.o(i.HAL_MspInit))
+<P><STRONG><a name="[63]"></a>HAL_MspInit</STRONG> (Thumb, 52 bytes, Stack size 8 bytes, stm32f1xx_hal_msp.o(i.HAL_MspInit))
 <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = HAL_MspInit
 </UL>
-<BR>[Called By]<UL><LI><a href="#[5b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
+<BR>[Called By]<UL><LI><a href="#[60]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
 </UL>
 
-<P><STRONG><a name="[71]"></a>HAL_NVIC_EnableIRQ</STRONG> (Thumb, 26 bytes, Stack size 0 bytes, stm32f1xx_hal_cortex.o(i.HAL_NVIC_EnableIRQ))
+<P><STRONG><a name="[76]"></a>HAL_NVIC_EnableIRQ</STRONG> (Thumb, 26 bytes, Stack size 0 bytes, stm32f1xx_hal_cortex.o(i.HAL_NVIC_EnableIRQ))
-<BR><BR>[Called By]<UL><LI><a href="#[70]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_DMA_Init
+<BR><BR>[Called By]<UL><LI><a href="#[75]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_DMA_Init
 </UL>
 
-<P><STRONG><a name="[60]"></a>HAL_NVIC_SetPriority</STRONG> (Thumb, 60 bytes, Stack size 16 bytes, stm32f1xx_hal_cortex.o(i.HAL_NVIC_SetPriority))
+<P><STRONG><a name="[65]"></a>HAL_NVIC_SetPriority</STRONG> (Thumb, 60 bytes, Stack size 16 bytes, stm32f1xx_hal_cortex.o(i.HAL_NVIC_SetPriority))
 <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = HAL_NVIC_SetPriority
 </UL>
-<BR>[Calls]<UL><LI><a href="#[61]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__NVIC_SetPriority
+<BR>[Calls]<UL><LI><a href="#[66]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__NVIC_SetPriority
 </UL>
-<BR>[Called By]<UL><LI><a href="#[70]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_DMA_Init
+<BR>[Called By]<UL><LI><a href="#[75]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_DMA_Init
-<LI><a href="#[5d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
+<LI><a href="#[62]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
 </UL>
 
-<P><STRONG><a name="[5c]"></a>HAL_NVIC_SetPriorityGrouping</STRONG> (Thumb, 26 bytes, Stack size 0 bytes, stm32f1xx_hal_cortex.o(i.HAL_NVIC_SetPriorityGrouping))
+<P><STRONG><a name="[61]"></a>HAL_NVIC_SetPriorityGrouping</STRONG> (Thumb, 26 bytes, Stack size 0 bytes, stm32f1xx_hal_cortex.o(i.HAL_NVIC_SetPriorityGrouping))
-<BR><BR>[Called By]<UL><LI><a href="#[5b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
+<BR><BR>[Called By]<UL><LI><a href="#[60]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
 </UL>
 
-<P><STRONG><a name="[62]"></a>HAL_RCCEx_PeriphCLKConfig</STRONG> (Thumb, 224 bytes, Stack size 32 bytes, stm32f1xx_hal_rcc_ex.o(i.HAL_RCCEx_PeriphCLKConfig))
+<P><STRONG><a name="[54]"></a>HAL_RCCEx_GetPeriphCLKFreq</STRONG> (Thumb, 148 bytes, Stack size 8 bytes, stm32f1xx_hal_rcc_ex.o(i.HAL_RCCEx_GetPeriphCLKFreq))
+<BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = HAL_RCCEx_GetPeriphCLKFreq
+</UL>
+<BR>[Calls]<UL><LI><a href="#[67]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_GetPCLK2Freq
+</UL>
+<BR>[Called By]<UL><LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADCEx_Calibration_Start
+</UL>
+
+<P><STRONG><a name="[68]"></a>HAL_RCCEx_PeriphCLKConfig</STRONG> (Thumb, 224 bytes, Stack size 32 bytes, stm32f1xx_hal_rcc_ex.o(i.HAL_RCCEx_PeriphCLKConfig))
 <BR><BR>[Stack]<UL><LI>Max Depth = 32<LI>Call Chain = HAL_RCCEx_PeriphCLKConfig
 </UL>
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
 </UL>
-<BR>[Called By]<UL><LI><a href="#[7e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
+<BR>[Called By]<UL><LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
 </UL>
 
-<P><STRONG><a name="[63]"></a>HAL_RCC_ClockConfig</STRONG> (Thumb, 280 bytes, Stack size 32 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_ClockConfig))
+<P><STRONG><a name="[69]"></a>HAL_RCC_ClockConfig</STRONG> (Thumb, 280 bytes, Stack size 32 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_ClockConfig))
 <BR><BR>[Stack]<UL><LI>Max Depth = 64<LI>Call Chain = HAL_RCC_ClockConfig &rArr; HAL_InitTick &rArr; HAL_NVIC_SetPriority
 </UL>
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
-<LI><a href="#[64]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_GetSysClockFreq
+<LI><a href="#[6a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_GetSysClockFreq
-<LI><a href="#[5d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
+<LI><a href="#[62]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
 </UL>
-<BR>[Called By]<UL><LI><a href="#[7e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
+<BR>[Called By]<UL><LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
 </UL>
 
-<P><STRONG><a name="[86]"></a>HAL_RCC_GetPCLK1Freq</STRONG> (Thumb, 20 bytes, Stack size 0 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq))
+<P><STRONG><a name="[88]"></a>HAL_RCC_GetPCLK1Freq</STRONG> (Thumb, 20 bytes, Stack size 0 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_GetPCLK1Freq))
-<BR><BR>[Called By]<UL><LI><a href="#[68]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_SetConfig
+<BR><BR>[Called By]<UL><LI><a href="#[70]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_SetConfig
 </UL>
 
-<P><STRONG><a name="[85]"></a>HAL_RCC_GetPCLK2Freq</STRONG> (Thumb, 20 bytes, Stack size 0 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq))
+<P><STRONG><a name="[67]"></a>HAL_RCC_GetPCLK2Freq</STRONG> (Thumb, 20 bytes, Stack size 0 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_GetPCLK2Freq))
-<BR><BR>[Called By]<UL><LI><a href="#[68]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_SetConfig
+<BR><BR>[Called By]<UL><LI><a href="#[54]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCCEx_GetPeriphCLKFreq
+<LI><a href="#[70]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_SetConfig
 </UL>
 
-<P><STRONG><a name="[64]"></a>HAL_RCC_GetSysClockFreq</STRONG> (Thumb, 58 bytes, Stack size 0 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_GetSysClockFreq))
+<P><STRONG><a name="[6a]"></a>HAL_RCC_GetSysClockFreq</STRONG> (Thumb, 58 bytes, Stack size 0 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_GetSysClockFreq))
-<BR><BR>[Called By]<UL><LI><a href="#[63]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
+<BR><BR>[Called By]<UL><LI><a href="#[69]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
 </UL>
 
-<P><STRONG><a name="[65]"></a>HAL_RCC_OscConfig</STRONG> (Thumb, 778 bytes, Stack size 40 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_OscConfig))
+<P><STRONG><a name="[6b]"></a>HAL_RCC_OscConfig</STRONG> (Thumb, 778 bytes, Stack size 40 bytes, stm32f1xx_hal_rcc.o(i.HAL_RCC_OscConfig))
 <BR><BR>[Stack]<UL><LI>Max Depth = 40<LI>Call Chain = HAL_RCC_OscConfig
 </UL>
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
 </UL>
-<BR>[Called By]<UL><LI><a href="#[7e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
+<BR>[Called By]<UL><LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
 </UL>
 
-<P><STRONG><a name="[5f]"></a>HAL_SYSTICK_Config</STRONG> (Thumb, 40 bytes, Stack size 8 bytes, stm32f1xx_hal_cortex.o(i.HAL_SYSTICK_Config))
+<P><STRONG><a name="[64]"></a>HAL_SYSTICK_Config</STRONG> (Thumb, 40 bytes, Stack size 8 bytes, stm32f1xx_hal_cortex.o(i.HAL_SYSTICK_Config))
 <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = HAL_SYSTICK_Config
 </UL>
-<BR>[Calls]<UL><LI><a href="#[61]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__NVIC_SetPriority
+<BR>[Calls]<UL><LI><a href="#[66]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__NVIC_SetPriority
 </UL>
-<BR>[Called By]<UL><LI><a href="#[5d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
+<BR>[Called By]<UL><LI><a href="#[62]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_InitTick
 </UL>
 
-<P><STRONG><a name="[83]"></a>HAL_UARTEx_RxEventCallback</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.HAL_UARTEx_RxEventCallback))
+<P><STRONG><a name="[86]"></a>HAL_UARTEx_RxEventCallback</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.HAL_UARTEx_RxEventCallback))
 <BR><BR>[Called By]<UL><LI><a href="#[3c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMARxHalfCplt
 <LI><a href="#[3b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMAReceiveCplt
 </UL>
 
-<P><STRONG><a name="[82]"></a>HAL_UART_ErrorCallback</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_ErrorCallback))
+<P><STRONG><a name="[6c]"></a>HAL_UART_ErrorCallback</STRONG> (Thumb, 20 bytes, Stack size 0 bytes, main.o(i.HAL_UART_ErrorCallback))
-<BR><BR>[Called By]<UL><LI><a href="#[3d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMAError
+<BR><BR>[Stack]<UL><LI>Max Depth = 44<LI>Call Chain = HAL_UART_ErrorCallback &rArr; HAL_UART_Receive_DMA &rArr; UART_Start_Receive_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
+</UL>
+<BR>[Calls]<UL><LI><a href="#[6d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Receive_DMA
+</UL>
+<BR>[Called By]<UL><LI><a href="#[3d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMAError
 </UL>
 
-<P><STRONG><a name="[66]"></a>HAL_UART_Init</STRONG> (Thumb, 100 bytes, Stack size 16 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_Init))
+<P><STRONG><a name="[6e]"></a>HAL_UART_Init</STRONG> (Thumb, 100 bytes, Stack size 16 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_Init))
-<BR><BR>[Stack]<UL><LI>Max Depth = 88<LI>Call Chain = HAL_UART_Init &rArr; HAL_UART_MspInit &rArr; HAL_GPIO_Init
+<BR><BR>[Stack]<UL><LI>Max Depth = 96<LI>Call Chain = HAL_UART_Init &rArr; HAL_UART_MspInit &rArr; HAL_GPIO_Init
 </UL>
-<BR>[Calls]<UL><LI><a href="#[67]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_MspInit
+<BR>[Calls]<UL><LI><a href="#[6f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_MspInit
-<LI><a href="#[68]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_SetConfig
+<LI><a href="#[70]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_SetConfig
 </UL>
-<BR>[Called By]<UL><LI><a href="#[74]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_USART1_UART_Init
+<BR>[Called By]<UL><LI><a href="#[79]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_USART1_UART_Init
 </UL>
 
-<P><STRONG><a name="[67]"></a>HAL_UART_MspInit</STRONG> (Thumb, 100 bytes, Stack size 32 bytes, usart.o(i.HAL_UART_MspInit))
+<P><STRONG><a name="[6f]"></a>HAL_UART_MspInit</STRONG> (Thumb, 138 bytes, Stack size 40 bytes, usart.o(i.HAL_UART_MspInit))
-<BR><BR>[Stack]<UL><LI>Max Depth = 72<LI>Call Chain = HAL_UART_MspInit &rArr; HAL_GPIO_Init
+<BR><BR>[Stack]<UL><LI>Max Depth = 80<LI>Call Chain = HAL_UART_MspInit &rArr; HAL_GPIO_Init
 </UL>
-<BR>[Calls]<UL><LI><a href="#[55]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_Init
+<BR>[Calls]<UL><LI><a href="#[5b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Init
+<LI><a href="#[5a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_Init
+<LI><a href="#[5c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Error_Handler
 </UL>
-<BR>[Called By]<UL><LI><a href="#[66]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Init
+<BR>[Called By]<UL><LI><a href="#[6e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Init
 </UL>
 
-<P><STRONG><a name="[69]"></a>HAL_UART_Receive_DMA</STRONG> (Thumb, 28 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_Receive_DMA))
+<P><STRONG><a name="[6d]"></a>HAL_UART_Receive_DMA</STRONG> (Thumb, 28 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_Receive_DMA))
 <BR><BR>[Stack]<UL><LI>Max Depth = 44<LI>Call Chain = HAL_UART_Receive_DMA &rArr; UART_Start_Receive_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
 </UL>
-<BR>[Calls]<UL><LI><a href="#[6a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_Start_Receive_DMA
+<BR>[Calls]<UL><LI><a href="#[71]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_Start_Receive_DMA
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
-<LI><a href="#[6b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_RxCpltCallback
+<LI><a href="#[6c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_ErrorCallback
 </UL>
 
-<P><STRONG><a name="[6b]"></a>HAL_UART_RxCpltCallback</STRONG> (Thumb, 20 bytes, Stack size 0 bytes, main.o(i.HAL_UART_RxCpltCallback))
+<P><STRONG><a name="[85]"></a>HAL_UART_RxCpltCallback</STRONG> (Thumb, 20 bytes, Stack size 0 bytes, main.o(i.HAL_UART_RxCpltCallback))
-<BR><BR>[Stack]<UL><LI>Max Depth = 44<LI>Call Chain = HAL_UART_RxCpltCallback &rArr; HAL_UART_Receive_DMA &rArr; UART_Start_Receive_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
+<BR><BR>[Called By]<UL><LI><a href="#[3b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMAReceiveCplt
-</UL>
-<BR>[Calls]<UL><LI><a href="#[69]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Receive_DMA
-</UL>
-<BR>[Called By]<UL><LI><a href="#[3b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMAReceiveCplt
 </UL>
 
-<P><STRONG><a name="[84]"></a>HAL_UART_RxHalfCpltCallback</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_RxHalfCpltCallback))
+<P><STRONG><a name="[87]"></a>HAL_UART_RxHalfCpltCallback</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_RxHalfCpltCallback))
 <BR><BR>[Called By]<UL><LI><a href="#[3c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMARxHalfCplt
 </UL>
 
-<P><STRONG><a name="[6c]"></a>HAL_UART_Transmit</STRONG> (Thumb, 160 bytes, Stack size 32 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_Transmit))
+<P><STRONG><a name="[57]"></a>HAL_UART_Transmit</STRONG> (Thumb, 160 bytes, Stack size 32 bytes, stm32f1xx_hal_uart.o(i.HAL_UART_Transmit))
 <BR><BR>[Stack]<UL><LI>Max Depth = 64<LI>Call Chain = HAL_UART_Transmit &rArr; UART_WaitOnFlagUntilTimeout
 </UL>
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
-<LI><a href="#[6d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_WaitOnFlagUntilTimeout
+<LI><a href="#[72]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_WaitOnFlagUntilTimeout
 </UL>
-<BR>[Called By]<UL><LI><a href="#[7a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Status_Response
+<BR>[Called By]<UL><LI><a href="#[7d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Status_Response
-<LI><a href="#[79]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
+<LI><a href="#[7c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
+<LI><a href="#[47]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_ErrorCallback
 </UL>
 
 <P><STRONG><a name="[2]"></a>HardFault_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.HardFault_Handler))
@@ -657,81 +709,67 @@ Global Symbols
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
-<P><STRONG><a name="[6e]"></a>MX_ADC1_Init</STRONG> (Thumb, 170 bytes, Stack size 32 bytes, adc.o(i.MX_ADC1_Init))
+<P><STRONG><a name="[73]"></a>MX_ADC1_Init</STRONG> (Thumb, 176 bytes, Stack size 32 bytes, adc.o(i.MX_ADC1_Init))
 <BR><BR>[Stack]<UL><LI>Max Depth = 136<LI>Call Chain = MX_ADC1_Init &rArr; HAL_ADC_Init &rArr; HAL_ADC_MspInit &rArr; HAL_GPIO_Init
 </UL>
-<BR>[Calls]<UL><LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Init
+<BR>[Calls]<UL><LI><a href="#[58]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_Init
-<LI><a href="#[6f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_ConfigChannel
+<LI><a href="#[74]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADC_ConfigChannel
-<LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Error_Handler
+<LI><a href="#[5c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Error_Handler
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
-<P><STRONG><a name="[70]"></a>MX_DMA_Init</STRONG> (Thumb, 40 bytes, Stack size 8 bytes, dma.o(i.MX_DMA_Init))
+<P><STRONG><a name="[75]"></a>MX_DMA_Init</STRONG> (Thumb, 56 bytes, Stack size 8 bytes, dma.o(i.MX_DMA_Init))
 <BR><BR>[Stack]<UL><LI>Max Depth = 24<LI>Call Chain = MX_DMA_Init &rArr; HAL_NVIC_SetPriority
 </UL>
-<BR>[Calls]<UL><LI><a href="#[60]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriority
+<BR>[Calls]<UL><LI><a href="#[65]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriority
-<LI><a href="#[71]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_EnableIRQ
+<LI><a href="#[76]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_EnableIRQ
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
-<P><STRONG><a name="[72]"></a>MX_GPIO_Init</STRONG> (Thumb, 240 bytes, Stack size 48 bytes, gpio.o(i.MX_GPIO_Init))
+<P><STRONG><a name="[77]"></a>MX_GPIO_Init</STRONG> (Thumb, 254 bytes, Stack size 48 bytes, gpio.o(i.MX_GPIO_Init))
 <BR><BR>[Stack]<UL><LI>Max Depth = 88<LI>Call Chain = MX_GPIO_Init &rArr; HAL_GPIO_Init
 </UL>
-<BR>[Calls]<UL><LI><a href="#[55]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_Init
+<BR>[Calls]<UL><LI><a href="#[5a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_Init
-<LI><a href="#[73]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_WritePin
+<LI><a href="#[78]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_WritePin
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
-<P><STRONG><a name="[74]"></a>MX_USART1_UART_Init</STRONG> (Thumb, 48 bytes, Stack size 8 bytes, usart.o(i.MX_USART1_UART_Init))
+<P><STRONG><a name="[79]"></a>MX_USART1_UART_Init</STRONG> (Thumb, 48 bytes, Stack size 8 bytes, usart.o(i.MX_USART1_UART_Init))
-<BR><BR>[Stack]<UL><LI>Max Depth = 96<LI>Call Chain = MX_USART1_UART_Init &rArr; HAL_UART_Init &rArr; HAL_UART_MspInit &rArr; HAL_GPIO_Init
+<BR><BR>[Stack]<UL><LI>Max Depth = 104<LI>Call Chain = MX_USART1_UART_Init &rArr; HAL_UART_Init &rArr; HAL_UART_MspInit &rArr; HAL_GPIO_Init
 </UL>
-<BR>[Calls]<UL><LI><a href="#[66]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Init
+<BR>[Calls]<UL><LI><a href="#[6e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Init
-<LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Error_Handler
+<LI><a href="#[5c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Error_Handler
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
-<P><STRONG><a name="[7b]"></a>Matrix_Compress_Row</STRONG> (Thumb, 42 bytes, Stack size 8 bytes, main.o(i.Matrix_Compress_Row))
+<P><STRONG><a name="[7e]"></a>Matrix_Compress_Row</STRONG> (Thumb, 44 bytes, Stack size 8 bytes, main.o(i.Matrix_Compress_Row))
 <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = Matrix_Compress_Row
 </UL>
-<BR>[Called By]<UL><LI><a href="#[79]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
+<BR>[Called By]<UL><LI><a href="#[7c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
-</UL>
-
-<P><STRONG><a name="[87]"></a>Matrix_Process_Data</STRONG> (Thumb, 62 bytes, Stack size 20 bytes, main.o(i.Matrix_Process_Data))
-<BR><BR>[Stack]<UL><LI>Max Depth = 20<LI>Call Chain = Matrix_Process_Data
-</UL>
-<BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
 <P><STRONG><a name="[50]"></a>Matrix_Reset_All_Rows</STRONG> (Thumb, 60 bytes, Stack size 8 bytes, main.o(i.Matrix_Reset_All_Rows))
 <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = Matrix_Reset_All_Rows
 </UL>
-<BR>[Calls]<UL><LI><a href="#[73]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_WritePin
+<BR>[Calls]<UL><LI><a href="#[78]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_WritePin
 </UL>
-<BR>[Called By]<UL><LI><a href="#[76]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Select_Row
+<BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
+<LI><a href="#[7a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Select_Row
 <LI><a href="#[4f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Device_Initialization
 </UL>
 
-<P><STRONG><a name="[75]"></a>Matrix_Scan_Next_Row</STRONG> (Thumb, 32 bytes, Stack size 8 bytes, main.o(i.Matrix_Scan_Next_Row))
+<P><STRONG><a name="[7a]"></a>Matrix_Select_Row</STRONG> (Thumb, 68 bytes, Stack size 8 bytes, main.o(i.Matrix_Select_Row))
-<BR><BR>[Stack]<UL><LI>Max Depth = 76<LI>Call Chain = Matrix_Scan_Next_Row &rArr; ADC_Start_Conversion &rArr; HAL_ADC_Start_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
-</UL>
-<BR>[Calls]<UL><LI><a href="#[51]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Delay
-<LI><a href="#[76]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Select_Row
-<LI><a href="#[4a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_Start_Conversion
-</UL>
-<BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
-</UL>
-
-<P><STRONG><a name="[76]"></a>Matrix_Select_Row</STRONG> (Thumb, 64 bytes, Stack size 8 bytes, main.o(i.Matrix_Select_Row))
 <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = Matrix_Select_Row &rArr; Matrix_Reset_All_Rows
 </UL>
-<BR>[Calls]<UL><LI><a href="#[73]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_WritePin
+<BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
+<LI><a href="#[78]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_WritePin
 <LI><a href="#[50]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Reset_All_Rows
 </UL>
-<BR>[Called By]<UL><LI><a href="#[75]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Scan_Next_Row
+<BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
 
 <P><STRONG><a name="[3]"></a>MemManage_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.MemManage_Handler))
@@ -751,12 +789,12 @@ Global Symbols
 <P><STRONG><a name="[8]"></a>PendSV_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.PendSV_Handler))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
-<P><STRONG><a name="[77]"></a>Process_Modbus_Command</STRONG> (Thumb, 80 bytes, Stack size 8 bytes, main.o(i.Process_Modbus_Command))
+<P><STRONG><a name="[7b]"></a>Process_Modbus_Command</STRONG> (Thumb, 90 bytes, Stack size 8 bytes, main.o(i.Process_Modbus_Command))
 <BR><BR>[Stack]<UL><LI>Max Depth = 88<LI>Call Chain = Process_Modbus_Command &rArr; Send_Matrix_Response &rArr; HAL_UART_Transmit &rArr; UART_WaitOnFlagUntilTimeout
 </UL>
-<BR>[Calls]<UL><LI><a href="#[78]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Verify_CRC16
+<BR>[Calls]<UL><LI><a href="#[78]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GPIO_WritePin
-<LI><a href="#[7a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Status_Response
+<LI><a href="#[7d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Status_Response
-<LI><a href="#[79]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
+<LI><a href="#[7c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Send_Matrix_Response
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
@@ -764,37 +802,37 @@ Global Symbols
 <P><STRONG><a name="[6]"></a>SVC_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.SVC_Handler))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
-<P><STRONG><a name="[79]"></a>Send_Matrix_Response</STRONG> (Thumb, 76 bytes, Stack size 16 bytes, main.o(i.Send_Matrix_Response))
+<P><STRONG><a name="[7c]"></a>Send_Matrix_Response</STRONG> (Thumb, 76 bytes, Stack size 16 bytes, main.o(i.Send_Matrix_Response))
 <BR><BR>[Stack]<UL><LI>Max Depth = 80<LI>Call Chain = Send_Matrix_Response &rArr; HAL_UART_Transmit &rArr; UART_WaitOnFlagUntilTimeout
 </UL>
-<BR>[Calls]<UL><LI><a href="#[6c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
+<BR>[Calls]<UL><LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
-<LI><a href="#[7b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Compress_Row
+<LI><a href="#[7e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Compress_Row
-<LI><a href="#[7c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Calculate_CRC16
+<LI><a href="#[7f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Calculate_CRC16
 </UL>
-<BR>[Called By]<UL><LI><a href="#[77]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
+<BR>[Called By]<UL><LI><a href="#[7b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
 </UL>
 
-<P><STRONG><a name="[7a]"></a>Send_Status_Response</STRONG> (Thumb, 48 bytes, Stack size 8 bytes, main.o(i.Send_Status_Response))
+<P><STRONG><a name="[7d]"></a>Send_Status_Response</STRONG> (Thumb, 48 bytes, Stack size 8 bytes, main.o(i.Send_Status_Response))
 <BR><BR>[Stack]<UL><LI>Max Depth = 72<LI>Call Chain = Send_Status_Response &rArr; HAL_UART_Transmit &rArr; UART_WaitOnFlagUntilTimeout
 </UL>
-<BR>[Calls]<UL><LI><a href="#[6c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
+<BR>[Calls]<UL><LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
-<LI><a href="#[7c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Calculate_CRC16
+<LI><a href="#[7f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Calculate_CRC16
 </UL>
-<BR>[Called By]<UL><LI><a href="#[77]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
+<BR>[Called By]<UL><LI><a href="#[7b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
 </UL>
 
 <P><STRONG><a name="[9]"></a>SysTick_Handler</STRONG> (Thumb, 4 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.SysTick_Handler))
-<BR><BR>[Calls]<UL><LI><a href="#[7d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_IncTick
+<BR><BR>[Calls]<UL><LI><a href="#[80]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_IncTick
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
-<P><STRONG><a name="[7e]"></a>SystemClock_Config</STRONG> (Thumb, 122 bytes, Stack size 88 bytes, main.o(i.SystemClock_Config))
+<P><STRONG><a name="[81]"></a>SystemClock_Config</STRONG> (Thumb, 120 bytes, Stack size 88 bytes, main.o(i.SystemClock_Config))
 <BR><BR>[Stack]<UL><LI>Max Depth = 152<LI>Call Chain = SystemClock_Config &rArr; HAL_RCC_ClockConfig &rArr; HAL_InitTick &rArr; HAL_NVIC_SetPriority
 </UL>
-<BR>[Calls]<UL><LI><a href="#[65]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_OscConfig
+<BR>[Calls]<UL><LI><a href="#[6b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_OscConfig
-<LI><a href="#[63]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
+<LI><a href="#[69]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_ClockConfig
-<LI><a href="#[62]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCCEx_PeriphCLKConfig
+<LI><a href="#[68]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCCEx_PeriphCLKConfig
-<LI><a href="#[7f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__aeabi_memclr4
+<LI><a href="#[82]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;__aeabi_memclr4
 </UL>
 <BR>[Called By]<UL><LI><a href="#[35]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;main
 </UL>
@@ -802,12 +840,12 @@ Global Symbols
 <P><STRONG><a name="[36]"></a>SystemInit</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, system_stm32f1xx.o(i.SystemInit))
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(.text)
 </UL>
-<P><STRONG><a name="[6a]"></a>UART_Start_Receive_DMA</STRONG> (Thumb, 130 bytes, Stack size 16 bytes, stm32f1xx_hal_uart.o(i.UART_Start_Receive_DMA))
+<P><STRONG><a name="[71]"></a>UART_Start_Receive_DMA</STRONG> (Thumb, 130 bytes, Stack size 16 bytes, stm32f1xx_hal_uart.o(i.UART_Start_Receive_DMA))
 <BR><BR>[Stack]<UL><LI>Max Depth = 44<LI>Call Chain = UART_Start_Receive_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
 </UL>
-<BR>[Calls]<UL><LI><a href="#[58]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Start_IT
+<BR>[Calls]<UL><LI><a href="#[5d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Start_IT
 </UL>
-<BR>[Called By]<UL><LI><a href="#[69]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Receive_DMA
+<BR>[Called By]<UL><LI><a href="#[6d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Receive_DMA
 </UL>
 
 <P><STRONG><a name="[5]"></a>UsageFault_Handler</STRONG> (Thumb, 2 bytes, Stack size 0 bytes, stm32f1xx_it.o(i.UsageFault_Handler))
@@ -817,109 +855,104 @@ Global Symbols
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> startup_stm32f103xb.o(RESET)
 </UL>
-<P><STRONG><a name="[78]"></a>Verify_CRC16</STRONG> (Thumb, 32 bytes, Stack size 8 bytes, main.o(i.Verify_CRC16))
+<P><STRONG><a name="[96]"></a>__scatterload_copy</STRONG> (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_copy), UNUSED)
-<BR><BR>[Stack]<UL><LI>Max Depth = 24<LI>Call Chain = Verify_CRC16 &rArr; Calculate_CRC16
-</UL>
-<BR>[Calls]<UL><LI><a href="#[7c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Calculate_CRC16
-</UL>
-<BR>[Called By]<UL><LI><a href="#[77]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
-</UL>
 
-<P><STRONG><a name="[93]"></a>__scatterload_copy</STRONG> (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_copy), UNUSED)
+<P><STRONG><a name="[97]"></a>__scatterload_null</STRONG> (Thumb, 2 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_null), UNUSED)
 
-<P><STRONG><a name="[94]"></a>__scatterload_null</STRONG> (Thumb, 2 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_null), UNUSED)
+<P><STRONG><a name="[98]"></a>__scatterload_zeroinit</STRONG> (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_zeroinit), UNUSED)
 
-<P><STRONG><a name="[95]"></a>__scatterload_zeroinit</STRONG> (Thumb, 14 bytes, Stack size unknown bytes, handlers.o(i.__scatterload_zeroinit), UNUSED)
+<P><STRONG><a name="[35]"></a>main</STRONG> (Thumb, 164 bytes, Stack size 0 bytes, main.o(i.main))
-
-<P><STRONG><a name="[35]"></a>main</STRONG> (Thumb, 126 bytes, Stack size 0 bytes, main.o(i.main))
 <BR><BR>[Stack]<UL><LI>Max Depth = 152<LI>Call Chain = main &rArr; SystemClock_Config &rArr; HAL_RCC_ClockConfig &rArr; HAL_InitTick &rArr; HAL_NVIC_SetPriority
 </UL>
-<BR>[Calls]<UL><LI><a href="#[74]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_USART1_UART_Init
+<BR>[Calls]<UL><LI><a href="#[79]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_USART1_UART_Init
-<LI><a href="#[72]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_GPIO_Init
+<LI><a href="#[77]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_GPIO_Init
-<LI><a href="#[70]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_DMA_Init
+<LI><a href="#[75]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_DMA_Init
-<LI><a href="#[6e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
+<LI><a href="#[73]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;MX_ADC1_Init
-<LI><a href="#[69]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Receive_DMA
+<LI><a href="#[6d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Receive_DMA
-<LI><a href="#[5b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
+<LI><a href="#[60]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Init
+<LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
 <LI><a href="#[51]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_Delay
-<LI><a href="#[7e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
+<LI><a href="#[53]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_ADCEx_Calibration_Start
-<LI><a href="#[77]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
+<LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;SystemClock_Config
-<LI><a href="#[75]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Scan_Next_Row
+<LI><a href="#[7b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Process_Modbus_Command
-<LI><a href="#[87]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Process_Data
+<LI><a href="#[7a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Select_Row
+<LI><a href="#[50]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Matrix_Reset_All_Rows
 <LI><a href="#[4f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Device_Initialization
 <LI><a href="#[4d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;Device_Address_Init
+<LI><a href="#[4a]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;ADC_Start_Conversion
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> entry9a.o(.ARM.Collect$$$$0000000B)
 </UL><P>
 <H3>
 Local Symbols
 </H3>
-<P><STRONG><a name="[5a]"></a>DMA_SetConfig</STRONG> (Thumb, 42 bytes, Stack size 12 bytes, stm32f1xx_hal_dma.o(i.DMA_SetConfig))
+<P><STRONG><a name="[5f]"></a>DMA_SetConfig</STRONG> (Thumb, 42 bytes, Stack size 12 bytes, stm32f1xx_hal_dma.o(i.DMA_SetConfig))
 <BR><BR>[Stack]<UL><LI>Max Depth = 12<LI>Call Chain = DMA_SetConfig
 </UL>
-<BR>[Called By]<UL><LI><a href="#[58]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Start_IT
+<BR>[Called By]<UL><LI><a href="#[5d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_DMA_Start_IT
 </UL>
 
-<P><STRONG><a name="[61]"></a>__NVIC_SetPriority</STRONG> (Thumb, 32 bytes, Stack size 0 bytes, stm32f1xx_hal_cortex.o(i.__NVIC_SetPriority))
+<P><STRONG><a name="[66]"></a>__NVIC_SetPriority</STRONG> (Thumb, 32 bytes, Stack size 0 bytes, stm32f1xx_hal_cortex.o(i.__NVIC_SetPriority))
-<BR><BR>[Called By]<UL><LI><a href="#[60]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriority
+<BR><BR>[Called By]<UL><LI><a href="#[65]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_NVIC_SetPriority
-<LI><a href="#[5f]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_SYSTICK_Config
+<LI><a href="#[64]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_SYSTICK_Config
 </UL>
 
 <P><STRONG><a name="[3d]"></a>UART_DMAError</STRONG> (Thumb, 74 bytes, Stack size 16 bytes, stm32f1xx_hal_uart.o(i.UART_DMAError))
-<BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = UART_DMAError
+<BR><BR>[Stack]<UL><LI>Max Depth = 60<LI>Call Chain = UART_DMAError &rArr; HAL_UART_ErrorCallback &rArr; HAL_UART_Receive_DMA &rArr; UART_Start_Receive_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
 </UL>
-<BR>[Calls]<UL><LI><a href="#[82]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_ErrorCallback
+<BR>[Calls]<UL><LI><a href="#[6c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_ErrorCallback
-<LI><a href="#[80]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndTxTransfer
+<LI><a href="#[83]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndTxTransfer
-<LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
+<LI><a href="#[84]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> stm32f1xx_hal_uart.o(i.UART_Start_Receive_DMA)
 </UL>
 <P><STRONG><a name="[3b]"></a>UART_DMAReceiveCplt</STRONG> (Thumb, 134 bytes, Stack size 8 bytes, stm32f1xx_hal_uart.o(i.UART_DMAReceiveCplt))
-<BR><BR>[Stack]<UL><LI>Max Depth = 52<LI>Call Chain = UART_DMAReceiveCplt &rArr; HAL_UART_RxCpltCallback &rArr; HAL_UART_Receive_DMA &rArr; UART_Start_Receive_DMA &rArr; HAL_DMA_Start_IT &rArr; DMA_SetConfig
+<BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = UART_DMAReceiveCplt
 </UL>
-<BR>[Calls]<UL><LI><a href="#[6b]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_RxCpltCallback
+<BR>[Calls]<UL><LI><a href="#[85]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_RxCpltCallback
-<LI><a href="#[83]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UARTEx_RxEventCallback
+<LI><a href="#[86]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UARTEx_RxEventCallback
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> stm32f1xx_hal_uart.o(i.UART_Start_Receive_DMA)
 </UL>
 <P><STRONG><a name="[3c]"></a>UART_DMARxHalfCplt</STRONG> (Thumb, 30 bytes, Stack size 8 bytes, stm32f1xx_hal_uart.o(i.UART_DMARxHalfCplt))
 <BR><BR>[Stack]<UL><LI>Max Depth = 8<LI>Call Chain = UART_DMARxHalfCplt
 </UL>
-<BR>[Calls]<UL><LI><a href="#[84]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_RxHalfCpltCallback
+<BR>[Calls]<UL><LI><a href="#[87]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_RxHalfCpltCallback
-<LI><a href="#[83]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UARTEx_RxEventCallback
+<LI><a href="#[86]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UARTEx_RxEventCallback
 </UL>
 <BR>[Address Reference Count : 1]<UL><LI> stm32f1xx_hal_uart.o(i.UART_Start_Receive_DMA)
 </UL>
-<P><STRONG><a name="[81]"></a>UART_EndRxTransfer</STRONG> (Thumb, 78 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.UART_EndRxTransfer))
+<P><STRONG><a name="[84]"></a>UART_EndRxTransfer</STRONG> (Thumb, 78 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.UART_EndRxTransfer))
-<BR><BR>[Calls]<UL><LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
+<BR><BR>[Calls]<UL><LI><a href="#[84]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
 </UL>
-<BR>[Called By]<UL><LI><a href="#[6d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_WaitOnFlagUntilTimeout
+<BR>[Called By]<UL><LI><a href="#[72]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_WaitOnFlagUntilTimeout
-<LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
+<LI><a href="#[84]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
 <LI><a href="#[3d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMAError
 </UL>
 
-<P><STRONG><a name="[80]"></a>UART_EndTxTransfer</STRONG> (Thumb, 28 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.UART_EndTxTransfer))
+<P><STRONG><a name="[83]"></a>UART_EndTxTransfer</STRONG> (Thumb, 28 bytes, Stack size 0 bytes, stm32f1xx_hal_uart.o(i.UART_EndTxTransfer))
-<BR><BR>[Calls]<UL><LI><a href="#[80]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndTxTransfer
+<BR><BR>[Calls]<UL><LI><a href="#[83]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndTxTransfer
 </UL>
-<BR>[Called By]<UL><LI><a href="#[80]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndTxTransfer
+<BR>[Called By]<UL><LI><a href="#[83]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndTxTransfer
 <LI><a href="#[3d]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_DMAError
 </UL>
 
-<P><STRONG><a name="[68]"></a>UART_SetConfig</STRONG> (Thumb, 178 bytes, Stack size 16 bytes, stm32f1xx_hal_uart.o(i.UART_SetConfig))
+<P><STRONG><a name="[70]"></a>UART_SetConfig</STRONG> (Thumb, 178 bytes, Stack size 16 bytes, stm32f1xx_hal_uart.o(i.UART_SetConfig))
 <BR><BR>[Stack]<UL><LI>Max Depth = 16<LI>Call Chain = UART_SetConfig
 </UL>
-<BR>[Calls]<UL><LI><a href="#[85]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_GetPCLK2Freq
+<BR>[Calls]<UL><LI><a href="#[67]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_GetPCLK2Freq
-<LI><a href="#[86]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_GetPCLK1Freq
+<LI><a href="#[88]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_RCC_GetPCLK1Freq
 </UL>
-<BR>[Called By]<UL><LI><a href="#[66]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Init
+<BR>[Called By]<UL><LI><a href="#[6e]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Init
 </UL>
 
-<P><STRONG><a name="[6d]"></a>UART_WaitOnFlagUntilTimeout</STRONG> (Thumb, 114 bytes, Stack size 32 bytes, stm32f1xx_hal_uart.o(i.UART_WaitOnFlagUntilTimeout))
+<P><STRONG><a name="[72]"></a>UART_WaitOnFlagUntilTimeout</STRONG> (Thumb, 114 bytes, Stack size 32 bytes, stm32f1xx_hal_uart.o(i.UART_WaitOnFlagUntilTimeout))
 <BR><BR>[Stack]<UL><LI>Max Depth = 32<LI>Call Chain = UART_WaitOnFlagUntilTimeout
 </UL>
 <BR>[Calls]<UL><LI><a href="#[45]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_GetTick
-<LI><a href="#[81]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
+<LI><a href="#[84]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;UART_EndRxTransfer
 </UL>
-<BR>[Called By]<UL><LI><a href="#[6c]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
+<BR>[Called By]<UL><LI><a href="#[57]">&gt;&gt;</a>&nbsp;&nbsp;&nbsp;HAL_UART_Transmit
 </UL>
 <P>
 <H3>