367 lines
13 KiB
C
367 lines
13 KiB
C
/* Copyright (C) 2018 RDA Technologies Limited and/or its affiliates("RDA").
|
||
* All rights reserved.
|
||
*
|
||
* This software is supplied "AS IS" without any warranties.
|
||
* RDA assumes no responsibility or liability for the use of the software,
|
||
* conveys no license or title under any patent, copyright, or mask work
|
||
* right to the product. RDA reserves the right to make changes in the
|
||
* software without notification. RDA also make no representation or
|
||
* warranty that such application will be suitable for the specified use
|
||
* without further testing or modification.
|
||
*/
|
||
|
||
#include "stdio.h"
|
||
#include "stdlib.h"
|
||
#include "cm_demo_main.h"
|
||
#include "cm_demo_uart.h"
|
||
#include "cm_demo_asocket.h"
|
||
#include "cm_demo_fs.h"
|
||
#include "cm_fs.h"
|
||
#include "cm_mem.h"
|
||
#include "cm_sys.h"
|
||
#include "cm_sim.h"
|
||
#include "cm_demo_i2c.h"
|
||
#include "cm_demo_adc.h"
|
||
#include "cm_demo_spi.h"
|
||
#include "cm_demo_lcd.h"
|
||
#include "cm_demo_gpio.h"
|
||
#include "cm_demo_keypad.h"
|
||
#include "cm_demo_pwm.h"
|
||
#include "cm_demo_pm.h"
|
||
#include "cm_demo_http.h"
|
||
#include "cm_demo_mqtt.h"
|
||
#include "cm_demo_ntp.h"
|
||
#include "cm_demo_fota.h"
|
||
#include "cm_demo_audio.h"
|
||
#include "cm_virt_at.h"
|
||
#include "cm_demo_virt_at.h"
|
||
#include "cm_rtc.h"
|
||
#include "cm_demo_lbs.h"
|
||
#include "cm_demo_tts.h"
|
||
#include "cm_modem.h"
|
||
#include "cm_demo_cJSON.h"
|
||
#include "cm_demo_sd.h"
|
||
#include "cm_demo_gnss.h"
|
||
#include "cm_demo_aliyun.h"
|
||
#include "cm_demo_wifiscan.h"
|
||
#include "cm_demo_camera.h"
|
||
#include "cm_demo_ftp.h"
|
||
#include "cm_demo_lwip.h"
|
||
#include "cm_demo_ssl.h"
|
||
|
||
#define SECOND_OF_DAY (24*60*60)
|
||
|
||
typedef struct cm_tm {
|
||
int tm_sec; /* 秒 – 取值区间为[0,59] */
|
||
int tm_min; /* 分 - 取值区间为[0,59] */
|
||
int tm_hour; /* 时 - 取值区间为[0,23] */
|
||
int tm_mday; /* 一个月中的日期 - 取值区间为[1,31] */
|
||
int tm_mon; /* 月份 */
|
||
int tm_year; /* 年份 */
|
||
}cm_tm_t;
|
||
|
||
osThreadId_t OC_APP_TaskHandle ;
|
||
osEventFlagsId_t cmd_task_flag;
|
||
|
||
static const char * weekday[] = {"Monday","Tuesday","Wednesday","Thursday","Friday","Saturday","Sunday"};
|
||
static const char DayOfMon[12] = {31,28,31,30,31,30,31,31,30,31,30,31};
|
||
|
||
void oc_ring_cb(unsigned char *param)
|
||
{
|
||
if(0 == strncmp((char *)param, "\r\nRING",6))//来电提示
|
||
{
|
||
cm_demo_printf("oc_ring_cb:%s\n",param);
|
||
}
|
||
else if (0 == strncmp((char *)param, "\r\n+CLCC:",8)) //来电信息
|
||
{
|
||
cm_demo_printf("oc_ring_cb:%s\n",param);
|
||
}
|
||
else if(0 == strncmp((char *)param, "\r\nNO CARRIER",12))//对方挂断
|
||
{
|
||
cm_demo_printf("oc_ring_cb:%s\n",param);
|
||
}
|
||
if (0 == strncmp((char *)param, "\r\n+CMTI:",8))//短信信息
|
||
{
|
||
cm_demo_printf("message:%s\n",param);
|
||
}
|
||
|
||
}
|
||
|
||
|
||
static void cm_sec_to_date(long lSec, cm_tm_t *tTime)
|
||
{
|
||
unsigned short i,j,iDay;
|
||
unsigned long lDay;
|
||
|
||
lDay = lSec / SECOND_OF_DAY;
|
||
lSec = lSec % SECOND_OF_DAY;
|
||
|
||
i = 1970;
|
||
while(lDay > 365)
|
||
{
|
||
if(((i%4==0)&&(i%100!=0)) || (i%400==0))
|
||
{
|
||
lDay -= 366;
|
||
}
|
||
else
|
||
{
|
||
lDay -= 365;
|
||
}
|
||
i++;
|
||
}
|
||
if((lDay == 365) && !(((i%4==0)&&(i%100!=0)) || (i%400==0)))
|
||
{
|
||
lDay -= 365;
|
||
i++;
|
||
}
|
||
tTime->tm_year = i;
|
||
for(j=0;j<12;j++)
|
||
{
|
||
if((j==1) && (((i%4==0)&&(i%100!=0)) || (i%400==0)))
|
||
{
|
||
iDay = 29;
|
||
}
|
||
else
|
||
{
|
||
iDay = DayOfMon[j];
|
||
}
|
||
if(lDay >= iDay) lDay -= iDay;
|
||
else break;
|
||
}
|
||
tTime->tm_mon = j+1;
|
||
tTime->tm_mday = lDay+1;
|
||
tTime->tm_hour = ((lSec / 3600))%24;//这里注意，世界时间已经加上北京时间差8，
|
||
tTime->tm_min = (lSec % 3600) / 60;
|
||
tTime->tm_sec = (lSec % 3600) % 60;
|
||
}
|
||
|
||
static uint8_t cm_time_to_weekday(cm_tm_t *t)
|
||
{
|
||
uint32_t u32WeekDay = 0;
|
||
uint32_t u32Year = t->tm_year;
|
||
uint8_t u8Month = t->tm_mon;
|
||
uint8_t u8Day = t->tm_mday;
|
||
if(u8Month < 3U)
|
||
{
|
||
/*D = { [(23 x month) / 9] + day + 4 + year + [(year - 1) / 4] - [(year - 1) / 100] + [(year - 1) / 400] } mod 7*/
|
||
u32WeekDay = (((23U * u8Month) / 9U) + u8Day + 4U + u32Year + ((u32Year - 1U) / 4U) - ((u32Year - 1U) / 100U) + ((u32Year - 1U) / 400U)) % 7U;
|
||
}
|
||
else
|
||
{
|
||
/*D = { [(23 x month) / 9] + day + 4 + year + [year / 4] - [year / 100] + [year / 400] - 2 } mod 7*/
|
||
u32WeekDay = (((23U * u8Month) / 9U) + u8Day + 4U + u32Year + (u32Year / 4U) - (u32Year / 100U) + (u32Year / 400U) - 2U ) % 7U;
|
||
}
|
||
|
||
if (0U == u32WeekDay)
|
||
{
|
||
u32WeekDay = 7U;
|
||
}
|
||
|
||
return (uint8_t)u32WeekDay;
|
||
}
|
||
|
||
cm_cmd_t cmd_vector[] = {
|
||
{"FWRITE", cm_test_write_file}, //CM:FWRITE
|
||
{"FREAD", cm_test_read_file}, //CM:FREAD
|
||
{"FMOVE", cm_test_move_file}, //CM:FMOVE
|
||
{"FDELETE", cm_test_delete_file}, //CM:FDELETE
|
||
{"GPIO_READ", cm_test_gpio_read},//CM:GPIO_READ:NUM:0xiomuxpin(16进制):0xiomuxfun(16进制)；例如CM:GPIO_READ:0:0x22:0x1
|
||
{"GPIO_WRITE", cm_test_gpio_write},//CM:GPIO_WRITE:NUM:0xiomuxpin(16进制):0xiomuxfun(16进制):value;例如CM:GPIO_WRITE:0:0x22:0x1:1
|
||
{"GPIO_IRQ", cm_test_gpio_irq},//CM:GPIO_IRQ:NUM:0xiomuxpin(16进制):0xiomuxfun(16进制)；例如CM:GPIO_IRQ:0:0x22:0x1
|
||
{"GPIO_IRQCOUNT", cm_test_acqure_irq_count},//CM:GPIO_IRQCOUNT
|
||
{"GPIO_DEINIT", cm_test_gpio_deinit},//CM:GPIO_DEINIT:NUM；例如CM:GPIO_DEINIT:0
|
||
{"PM_REBOOT", cm_test_pm_reboot},//CM:PM_REBOOT
|
||
{"PM_POWEROFF", cm_test_pm_poweroff},//CM:PM_POWEROFF
|
||
{"PM_REASON", cm_test_pm_power_on_reason},//CM:PM_REASON
|
||
{"PM_SLEEP", cm_test_sleep_or_wakeup_enable},//CM:PM_SLEEP：mode(0,初始化;1,允许进入休眠;2,退出休眠;) ；例如允许进入休眠：CM:PM_SLEEP:1
|
||
{"PM_POWERKEY", cm_test_pm_powerkey},//CM:PM_POWERKEY:mode mode=0:注册为空；mode非0:注册回调函数；
|
||
{"KEYPAD", cm_test_keypad},//CM:KEYPAD:行数(5):行号0,行号1:行号2:行号3:行号4:列数(5):列号0:列号1:列号2:列号3:列号4;例如CM:KEYPAD:5:0:1:2:3:4:5:0:1:2:3:4 备注:5x5的键盘
|
||
{"PWM_OPEN", cm_test_pwm_start},//CM:PWM_OPEN:dev:clk(时钟源,32000/12800000):period(周期):period_h(高电平占用时间)；例如CM:PWM_OPEN:0:32000:20000:10000
|
||
{"PWM_CLOSE", cm_test_pwm_close},//CM:PWM_CLOSE:dev ； 例如CM:PWM_CLOSE:0
|
||
// {"LBS", cm_test_lbs_start},//CM:LBS GCLN不支持;高德1.0平台:CM:LBS:platform:key:time_out:nearbts_enable:digital_sign_enable:digital_key;高德2.0平台:CM:LBS:platform:key:time_out:show_fields_enable:nearbts_enable:digital_sign_enable:digital_key;OneOS平台:CM:LBS:platform:pid:time_out:nearbts_enable
|
||
{"HTTP", cm_test_http}, //CM:HTTP:operation
|
||
{"MQTT", cm_test_mqtt}, //CM:MQTT:...
|
||
{"ASOCKET", cm_test_asocket}, //CM:ASOCKET:...
|
||
{"VIRT_AT", cm_virt_at_test}, //CM:VIRT_AT:AT+xxxx
|
||
{"PIN_CMD", cm_test_pin_cmd},
|
||
{"NTP", cm_test_ntp}, //CM:NTP:operation
|
||
{"I2C", cm_test_i2c}, //CM:I2C
|
||
{"ADC", cm_test_adc}, //CM:ADC
|
||
{"SPI", cm_test_spi}, //CM:SPI
|
||
{"LCD", cm_test_lcd}, //CM:LCD
|
||
{"LCDID", cm_test_lcd_read_id}, //CM:LCDID
|
||
{"FOTA", cm_test_fota}, //CM:FOTA:operation
|
||
{"TTS", cm_test_tts}, //CM:TTS:operation
|
||
{"cJSON", cm_test_cJSON}, //CM:cJSON
|
||
// {"FTP", cm_test_ftp}, //CM:FTP
|
||
// {"LWIP", cm_test_lwip}, //CM:LWIP:operation
|
||
// {"SSL", cm_test_ssl}, //CM:SSL:operation
|
||
// {"ALIYUN", cm_test_aliyun}, //CM:ALIYUN
|
||
// {"WIFISCAN", cm_test_wifiscan}, //CM:WIFISCAN:operation
|
||
// {"ALIYUNOTA", cm_aliyun_ota_test}, //CM:ALIYUNOTA
|
||
#if 0 //仅-G支持GNSS，且ML307A的uart2和GNSS串口使用的是同一个串口，两者不能同时使用
|
||
{"GNSS_ENABLE" , cm_test_gnss_enable}, //CM:GNSS_ENABLE:enable(0,关闭;1,关闭):type (NMEA报文上送类型):agnss_enable(是否开启辅助定位,1,关闭,2,开启);例如CM:GNSS_ENABLE:1:1:1
|
||
{"GNSS_LOCATE" , cm_test_gnss_getlocateinfo}, //CM:GNSS_LOCATE
|
||
{"GNSS_GETRAW" , cm_test_gnss_getrawdata}, //CM:GNSS_GETRAW
|
||
{"GNSS_SENDRAW" , cm_test_gnss_sendrawdata}, //CM:GNSS_SENDRAW:senddata;例如热重启发送 CM:GNSS_SENDRAW:RESET,1
|
||
{"GNSS_CONFIG" , cm_test_gnss_config}, //CM:GNSS_CONFIG:config_type(配置类型):value(值);例如CM:GNSS_CONFIG:2:30
|
||
{"AGNSS_CMD" , cm_test_agnss_update}, //CM:AGNSS_CMD:cmd(1,更新辅助数据;2,查询辅助数据是否有效)；例如CM:AGNSS_CMD:1
|
||
{"GNSS_RESET" , cm_test_gnss_reset}, //CM:GNSS_RESET
|
||
#endif
|
||
|
||
#if 0 //仅8M版本（DSLN GSLN）支持audio
|
||
{"AUDIO_PLAY", cm_test_audio_play}, //CM:AUDIO_PLAY:operation:param
|
||
{"AUDIO_RECORD", cm_test_audio_record}, //CM:AUDIO_RECORD:operation:param
|
||
#endif
|
||
// {"SD", cm_test_sd}, //CM:SD:operation
|
||
#if 0 //仅8M版本支持
|
||
{"CAM_PRE", cm_test_camera_preview},
|
||
{"CAM_CAP", cm_test_camera_capture},
|
||
{"QR_DECODE", cm_test_qr_decode}, //若要编译或使用二维码解析功能，需在third-party/third-party.mk中打开zbar编译
|
||
#endif
|
||
};
|
||
|
||
|
||
void my_appimg_enter(char *param)
|
||
{
|
||
cm_demo_uart();
|
||
cm_uart_cmd_recv_t *pUartCmdRecv_t = &gstUartCmdRecv;
|
||
char buf[CM_VER_LEN] = {0};
|
||
cm_tm_t t;
|
||
int i;
|
||
int ret;
|
||
int pdp_time_out=0;
|
||
cm_fs_system_info_t info = {0, 0};
|
||
cm_heap_stats_t stats = {0};
|
||
cm_demo_printf("\n\n\n\n\n\n\n\n\n\n");
|
||
cm_demo_printf("CM OpenCPU Starts\n");
|
||
cm_sys_get_cm_ver(buf, CM_VER_LEN);
|
||
cm_demo_printf("SDK VERSION:%s\n", buf);
|
||
cm_fs_getinfo(&info);
|
||
cm_mem_get_heap_stats(&stats);
|
||
cm_demo_printf("fs total:%d,remain:%d\n", info.total_size, info.free_size);
|
||
cm_demo_printf("heap total:%d,remain:%d\n",stats.total_size,stats.free);
|
||
|
||
cm_demo_printf("waiting for network...\n");
|
||
while(1)
|
||
{
|
||
if(pdp_time_out>10)
|
||
{
|
||
cm_demo_printf("network timeout\n");
|
||
break;
|
||
}
|
||
if(cm_modem_get_pdp_state(1) == 1)
|
||
{
|
||
cm_demo_printf("network ready\n");
|
||
break;
|
||
}
|
||
osDelay(200);
|
||
pdp_time_out++;
|
||
}
|
||
|
||
osDelay(200);
|
||
cm_virt_at_urc_reg((cm_at_urc_callback)oc_ring_cb);
|
||
cm_sec_to_date((long)(cm_rtc_get_current_time() + cm_rtc_get_timezone() * 60 * 60), &t);
|
||
cm_demo_printf("Now:%d-%d-%d:%d:%d:%d,%s\n", t.tm_year, t.tm_mon , t.tm_mday, t.tm_hour, t.tm_min, t.tm_sec,weekday[cm_time_to_weekday(&t)-1]);
|
||
|
||
memset(buf, 0, CM_VER_LEN);
|
||
ret = cm_sys_get_sn(buf);
|
||
if (ret == 0)
|
||
{
|
||
cm_demo_printf("SN:%s\n", buf);
|
||
}
|
||
else
|
||
{
|
||
cm_demo_printf("SN ERROR\n");
|
||
}
|
||
|
||
memset(buf, 0, CM_VER_LEN);
|
||
ret = cm_sys_get_imei(buf);
|
||
if (ret == 0)
|
||
{
|
||
cm_demo_printf("IMEI:%s\n", buf);
|
||
}
|
||
else
|
||
{
|
||
cm_demo_printf("IMEI ERROR\n");
|
||
}
|
||
|
||
memset(buf, 0, CM_VER_LEN);
|
||
ret = cm_sim_get_imsi(buf);
|
||
if (ret == 0)
|
||
{
|
||
cm_demo_printf("IMSI:%s\n", buf);
|
||
}
|
||
else
|
||
{
|
||
cm_demo_printf("IMSI ERROR\n");
|
||
}
|
||
|
||
/* 获取ICCID示例 */
|
||
char cm_iccid[32] = {0};
|
||
cm_sim_get_iccid(cm_iccid);
|
||
cm_demo_printf("ICCID:%s\n", cm_iccid);
|
||
|
||
while(1)
|
||
{
|
||
cm_demo_printf("\nplease input cmds:\n");
|
||
pUartCmdRecv_t->cmd_execute = 0;
|
||
osEventFlagsWait(cmd_task_flag, 0x00000001U, osFlagsWaitAny, osWaitForever);
|
||
|
||
if ((pUartCmdRecv_t->len < 2))
|
||
{
|
||
cm_demo_printf("CMD NOT DEFINE\n");
|
||
}
|
||
else
|
||
{
|
||
for (i = 0; i < (sizeof(cmd_vector) / sizeof(cm_cmd_t)); i++)
|
||
{
|
||
if (NULL == pUartCmdRecv_t->buf[1])
|
||
{
|
||
break;
|
||
}
|
||
if (strcmp((const char *)pUartCmdRecv_t->buf[1], cmd_vector[i].cmdstr) == 0)
|
||
{
|
||
(*(cmd_vector[i].cmdfunc))(pUartCmdRecv_t->buf, pUartCmdRecv_t->len);
|
||
cm_demo_printf("OK\n");
|
||
break;
|
||
}
|
||
}
|
||
if (i >= (sizeof(cmd_vector) / sizeof(cm_cmd_t)))
|
||
{
|
||
cm_demo_printf("CMD NOT DEFINE\n");
|
||
}
|
||
}
|
||
for (i = 0; i < pUartCmdRecv_t->len; i++)
|
||
{
|
||
if (NULL != pUartCmdRecv_t->buf[i])
|
||
{
|
||
cm_free(pUartCmdRecv_t->buf[i]);
|
||
pUartCmdRecv_t->buf[i] = NULL;
|
||
}
|
||
}
|
||
}
|
||
|
||
|
||
}
|
||
|
||
int cm_opencpu_entry(char *param)
|
||
{
|
||
cmd_task_flag = osEventFlagsNew(0);
|
||
if (cmd_task_flag == 0)
|
||
{
|
||
cm_log_printf(0,"event flag init failed");
|
||
return -1;
|
||
}
|
||
|
||
osThreadAttr_t app_task_attr = {0};
|
||
app_task_attr.name = "main_task";
|
||
app_task_attr.stack_size = 4096 * 2;
|
||
app_task_attr.priority = osPriorityNormal;
|
||
|
||
OC_APP_TaskHandle = osThreadNew((osThreadFunc_t)my_appimg_enter,0,&app_task_attr);
|
||
|
||
return 0;
|
||
}
|
||
|